Search:

Type: Posts; User: 4343; Keyword(s):

Search: Search took 0.08 seconds.

  1. Ferrofluid Source?

    Found PE sells Ferrofluid:

    http://www.parts-express.com/pe/showdetl.cfm?Partnumber=340-540

    Is that the right stuff?

    The original fluid has dried up a bit on one gap, it's like a thick paste,...
  2. Thanks, it seems the tone is SOP with domes of...

    Thanks, it seems the tone is SOP with domes of all sorts.

    I just opened one 046TI and found that the thin foam pad on the pole piece was disintegrating and partially stuck on the underside of the...
  3. Sticky Foam

    Thanks David. This pair has two issues, the foam ring is about to dissolve and the foam pad in the rear has also seen better days.

    Both pieces are a little sticky and do not "bounce back" when...
  4. Foam size/source?

    OK, all back together and working as they should. I wired them up bi-amped initially, they do sound pretty good, although there is a bit of grit at higher levels that makes me think the domes may...
  5. Questions...

    I noticed that one of the port tubes has a few bits missing on the flange. Part #70515-02 (Not For Sale). Possible to find?

    Polarity of the 116H-3? :dont-know: <Found the footnote on the T/S, my...
  6. How to trash a pair of XPL140A's (Without Really Hurting Them)

    Start by tossing the original 116H-3's 'cause the foam rotted. Find a pair of car woofers that sort of fit. Then completely bypass the crossovers, adding a single capacitor to the mids and tweets....
Results 1 to 6 of 6