Any ideas on an approach to rid the drivers of this problematic connector? Off the cuff, I'm thinking a screw with nut and a slip on tab type terminal would be the way to go, but if there is a more...
Type: Posts; User: boethius; Keyword(s):
Any ideas on an approach to rid the drivers of this problematic connector? Off the cuff, I'm thinking a screw with nut and a slip on tab type terminal would be the way to go, but if there is a more...
So I settled on using Concobium Mold Control, rather than some of the bleach like products. Firstly, I wiped all the driver surfaces with a dry rag and small brush to mechanically remove as much...
An ozone generator might also work and they are available from Amazon for only about $70, I have one on order. People seem to have good results with them. I have had the drivers for 4 days now and...
I reluctantly picked up a set of L100s that have sat in an unconditioned shed for the last 20 years. They would otherwise have ended up in the garbage, so I paid the $5 and took them home. The...
Well, inspecting both crossovers, there is a 10uF (electrolytic) on the L19 crossover, as well as two coils and a film cap of unknown capacitance. A sand resistor, too. The 4301B has two film caps,...
In looking at this thread, the 116A (L19 woofer) and 116H (4301B woofer, inverted dome) have identical parameters, which is quite a fluke, as the drivers look much different from each other. They...
Are the large can type caps I'm seeing on the crossover electrolytic? They seem awfully large for such low value, my guess is that they are film.
They are not lonely. They have a bunch of unused weight lifting equipment to keep them company.
Well, I'll confirm what has already been said, the green/black stripe wire goes to the black terminal on the woofer. I also experimented with swapping the inputs and it sounds the same to me, at...
Yes, I will try both options and post my impressions.
I'll put a battery on it and confirm which side is + and which is -. I'm pretty sure, though, that the green/black on red gave a noticeable improvement when I did some experimenting awhile back, it...
I've gotten a set of these and want to make sure that it is wired up correctly. I have found the network here:
http://www.jblproservice.com/pdf/Network%20Schematics/3113B%20Network.pdf
LE10H...