Search:

What is the dimension of the FreeFlow(TM) port (diameter and length)?

Yehuda.

I am building a 4.5 cu.ft. enclosure from Baltic birch for a 2235H.
I want to use 0.75"R quarter round solid hardwood on the front baffle.
Will it affect the rigidity of the front baffle?

What do you think about MultiCap capacitors?

What is the value of C14? Did they mean 0.4uF?

Thanks.

Thanks,

The 2225H that I bought is in excellent condition, it was never installed in a box. I think that I will first try it, maybe it will sound good.

If not the enclosure is already 8...

What kit do I need in order to convert my 2225H to a 2235H?
I read a post saying something about a mass ring?

Here is the enclosure I will use. It is the 8 cu.ft. from Kramer and Timbers.
Now I need to design the crossover. The amplifier will be the Hypex UcD180.

I checked the simulation of the 2235H in a 4.5 cu.ft. (grey line) with recommended EQ and the 2225H in the 8 cu.ft. (orenge) - the bump at 50Hz is from the 8 order low pass at 55Hz (I need this...

The picture shows the sub simulation in a 210 litre box tuned to 28Hz with electronic EQ. The sub sensitivity is 88dB @ 30Hz and at 10W it reaches 98dB (more the enough :)).
I don't think that group...

In an 8 cu.ft. the driver will reach 25Hz without the need for the 6dB boost (Thats what the simulation shows).
The Almighty subwoofer uses the 2226G unit in an 8 cu.ft. enclosure.
...

I placed the woofer on the table and raised it 1 feet.
The T/S are not the same as JBL but when I used them in WinISD the results where close to JBL.
Because their is close relation between the...

The second time I measured the T/S I mounted the woofer 3 feet above the floor and the readings were still far off, I think that this is because of reflections from the walls and floor.

What is...

:) Greetings,

I have a Clio win 6.5 and I am trying to measure the T/S parameters of my 2225H.

Unfortunately the results that I get are far off from JBL. Anybody tried to measure T/S...