Search:

Type: Posts; User: bwireman; Keyword(s):

Search: Search took 0.01 seconds.

  1. photo of le25-2 without dustcap, the voice coil...

    photo of le25-2 without dustcap, the voice coil is attached to the cone so it appears there is no access to the wiring through the dust cap.
    thus, it would appear that repairs would have to be made...
  2. question, access to the voice coil via the dust cover.

    i have located a frontal photo of the le25 tweeter with the surround, cone and dust cap missing from the assembly.
    it would appear that the voice coil is shown, missing on the front side of the...
  3. anyone have a pic of le25 tweeter with back the cover removed

    does anyone have a picture that they could post of the le25 tweeter with the back cover removed, showing internal coil assembly in the frame.
    the picture will help me to decide how to remove the my...
  4. removing the back cover and magnet assy., no success

    attempted to remove the rear cover on the le25 tweeter, used a low wattage heat gun with small nozzle directly heat the glue while a prying the frame up.
    result, no movement, the glue must have a...
  5. demagnification should not be to difficult a project.

    once the magnet is pulled off the frame, to demagnify you can place it in the oven and pull out to test.
    when the magnetic fields have been shut down, you could continue the repairs to the coil....
  6. le25 tweeter access to back of speaker to repair broken wire

    jbl century l100 speakers, were tested and working, after transport one of the le25 wires is open.
    measured ohmmage from the wire connectors to the wire going to the cone on both sides.
    problem is...
Results 1 to 6 of 6