Back in high school I was part time at a recording studio doing service work for the studio and the school district The owner, Jerry was a nice guy but frequently not focused. We had a brand new...
Type: Posts; User: Cyclotronguy; Keyword(s):
Back in high school I was part time at a recording studio doing service work for the studio and the school district The owner, Jerry was a nice guy but frequently not focused. We had a brand new...
Not my top choice, but have you considered a 6th order bandpass box? That might make the Sd of the port into the listening space, better fit your constraints
You can model it. An Onken W is 200+liters box with a port Sd about the same area as the speaker cone Tuning as I recall was 36 Hz.
On Ebay, Member "Zonkers" has built L-300 cabinets that rival anything the factory did. He sells plans for the cabinets, the grill frames and crossover boards..... very nice!
You can get boiled linseed (which isn't actually boiled) but you can forget Turpintine dryers for the linseed and paint grade alcohol to clean or use to cut shelac.
Dents can sometimes be...
I have been told by a factory service tech the OEM oil was Anderol 465, Kevin Brooks at KAB Engineering stocks it in small quantities.
Cheeers
A series 0.47 ohm 10w non-inductive resistor in the speaker + lead will do wonders at emulaiting a low damping factor amp.
As mentioned earlier the vintage la Scala's love output iron.. but if...
Have you tried reaching out to Electori?
[email protected]
Cheers
Kent
8926189262
EV does not as far as I know publish T/S parameters for their drive elements , so if you wish to truly engineer something you will simply have to measure and model. It may or may not be a good...
Not my cabinets. Actually if anyone has photo's of my 4560's it would be Ian in Australia.... but that is another story. They ended up in my wife's office with horns stuffed into the cabinets and a...
The wife would be perfectly happy with "Everest" or most anything from
Greg. The SCL and I would be on the thrash heap together
PS
I belive the tweeter was a Fostex crossed first order
I engaged the Electori staff in discussion of the 6041 many years ago at a CES meet and greet. A long walk down Las Vegas Blvd and memory lane.
At the time they still had staffing who had been...
I've had good luck with Titebond II thined and applied with a Binks touch-up gun, but only on smaller projects and then ironed down.
The only really substantial project was VOTT sized speaker...
We're Ian Mac in a bubble he'd be a dark horse.
But I have it on good authority that he's had some pretty learned assistance on this project
I think this is going to be very very special!
That style of nut is not really suitable for particle board, MDF, HDF or generally species wood. best used in plywood. For the others the usual choice would be "Propel nuts" they have a spiral...
On a budget an small the REL T7i and T9i are not to be overlooked
Cheers
I hate spam... so lets see if we can put some context to this:
Thievery Corp is an east coast duo that samples / remixes a really diverse range of music: Dubstep, Bossa Nova, electronica, jazz...
My wife had 4560a's in her home office for years and loved them, not a large room.. about 2-1/2m from the listening location. Yes they absolutely dominated the room. They were run with a Nelson...
Last I knew he was retired, semi retired in Torrance CA.... that however is old info. You might want to check with the Orange County Audio Society
Heather
Back in the day we used to cut the center welds in the 511 horn septum's and then rejoin the top and bottom segments with RTV...... that too killed the ringing
A couple layers of...
Discogs is your friend... 83 instances of the 1973 release listed for sale
https://www.discogs.com/Various-Sessions/master/563290
Fortunately we know the staffing at Electori very well, through the Pass Labs crew and their English is excellent... better than mine!
Having said that we're reaching back a very long way, and...
I've had both, neither of which were ever exactly stock. My 4560's had little 4" kicks put under them to increase the volume and were fit with 416-8B's. I liked the 4560's better than the A7.
...