Search:

Type: Posts; User: robertg; Keyword(s):

Page 1 of 11 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    8
    Views
    786

    I just get rid of all of my 2404H and H1 parts,...

    I just get rid of all of my 2404H and H1 parts, so I can't take pictures. The H and H1 look similar but most parts are not interchangeable. The bolt pattern is different and the nose piece is a...
  2. Replies
    12
    Views
    2,145

    They are held in with epoxy, so they are pretty...

    They are held in with epoxy, so they are pretty permanent. It might be difficult to cut them with all of the bracing in the cabinet. I might have to use a hack saw blade.

    When I run a slow sweep...
  3. Replies
    12
    Views
    2,145

    I read that adding more damping material lowers...

    I read that adding more damping material lowers your tuning, so I'm not going to do that. I'm going to buy DATS V3 and get a more accurate measurement. That will be later in the year, Summer is still...
  4. Replies
    12
    Views
    2,145

    I will add more fill and hopefully that will...

    I will add more fill and hopefully that will change the tuning. It probably won't happen for a few weeks.
  5. Replies
    12
    Views
    2,145

    DIY M2 Questions

    I built a pair of M2s lately and I have a few questions. I quickly checked the tuning and it seems to be 24 Hz, not 27. The ports are 8 3/4" or 22.2 cm long with a rounded outlet and the internal...
  6. Replies
    375
    Views
    248,470

    I kept the M Roadster for about 10 months, I...

    I kept the M Roadster for about 10 months, I actually made a bit of money on it. I think they went up in value quite a bit since then, this one had about 10,000 miles on it only and was in perfect...
  7. Replies
    375
    Views
    248,470

    I bought a black 2002 M Roadster from a BMW...

    I bought a black 2002 M Roadster from a BMW dealer in Charlottesville VA back in 2010 or so. I remember flying in to Richmond and it was a little over an hour from there. I bought the car over the...
  8. Replies
    59
    Views
    29,039

    I ended up buying them in the US, I had to get...

    I ended up buying them in the US, I had to get them shipped to a USA address. I can't remember if the Italian guy got back to me, but I don't think he did.

    The Russian found some more foilcals...
  9. Replies
    51
    Views
    9,421

    For a while I was using a 50w Krell KSA50S for...

    For a while I was using a 50w Krell KSA50S for the top end of my 4345 clone. I didn't think more was required.
  10. Replies
    14
    Views
    2,828

    The back must be able to come off them.

    The back must be able to come off them.
  11. Replies
    14
    Views
    2,828

    If you look at the bottom of the speaker there...

    If you look at the bottom of the speaker there should be a slot where you can slide out the grill. A picture without the cloth covering the drivers would be make it easier to identify whats in it.
  12. https://ardec.ca/en/p/523/polyx-oil?gclid=CjwKCAjw...

    https://ardec.ca/en/p/523/polyx-oil?gclid=CjwKCAjwhYOFBhBkEiwASF3KGc23C8OdKHcvBizdaWdGklEyYwyLtlYlT5sOKgorH6ca4yWynXomBBoC8esQAvD_BwE

    I used this before, 125 ml is more than enough. It's made for...
  13. It's called Osmo Polyx. If you don't have Watco...

    It's called Osmo Polyx. If you don't have Watco in Spain, you probably don't have Osmo. In Canada there must be 10 different brands of wood finishes that basically do the same job. I'm assuming there...
  14. Why don't you use Watco danish oil, or Osmo?

    Why don't you use Watco danish oil, or Osmo?
  15. Replies
    52
    Views
    25,444

    I only kept them for a few months, I didn't care...

    I only kept them for a few months, I didn't care for them.
  16. Replies
    3
    Views
    2,051

    Some information here ...

    Some information here

    http://www.audioheritage.org/vbulletin/showthread.php?1346-JBL-UREI-6290-and-6260-Amps/page3&highlight=6290
  17. Replies
    3
    Views
    2,051

    I remember doing something like that about four...

    I remember doing something like that about four years ago. From what I remember instead of the fan running all the time, it only comes on as needed. I thought I put a toggle switch in series with the...
  18. Replies
    3
    Views
    4,444

    It looks home made. You can almost make out a...

    It looks home made. You can almost make out a bullet tweeter on the right speaker, so my guess would be a 030 system with a D130 and a 075.
  19. Replies
    3
    Views
    9,155

    I saw BO's post about the Bryston 10BLR from...

    I saw BO's post about the Bryston 10BLR from 2006. I ended up buying one today that has 308 Hz cards in it.
  20. Replies
    3
    Views
    9,155

    Bryston 10B LR vs STD for 4345

    Does anyone know what version would work better for a 4345 clone? The LR version has only a 24 DB crossover slope, and the STD version has 6, 12, and 18 DB slopes. On the LR version you can pick any...
  21. Replies
    12
    Views
    5,861

    That's an interesting colour choice. I like the...

    That's an interesting colour choice. I like the dark wood, but the blue is a little bright for me. Is it stained walnut?

    When I built mine I was debating if I should build them as an exact clone,...
  22. Replies
    95
    Views
    31,269

    I was having problems with my power...

    I was having problems with my power conditioner/sequencer and my Krell amp. It didn't want to turn on the Krell for some reason unless something else was plugged in to the same stage. I decided to...
  23. Replies
    95
    Views
    31,269

    My next step is to buy a Bryston 10B crossover,...

    My next step is to buy a Bryston 10B crossover, hopefully I will find a reasonably priced one this summer.

    A couple of days ago I played the same song at the same time on my Dac, CD, and Sonos. I...
  24. Replies
    95
    Views
    31,269

    I probably bought it around Christmas or so. ...

    I probably bought it around Christmas or so.

    I have a Cambridge Audio DacMagic Plus DAC, Sonos Connect, Sony CDP-D12 CD player, Mcintosh C2200 tube preamp, Crest 7001 amp for the 2445s, and a...
  25. Replies
    95
    Views
    31,269

    When I crank it up the clip/limit light on the...

    When I crank it up the clip/limit light on the 550w Crest 2445 amp are my limiting factor. When I was quad amping I used a 25w multi channel McIntosh amp on the top three. I could never make the...
Results 1 to 25 of 252
Page 1 of 11 1 2 3 4