i do. Totally got scammed. Guy was in the Phx area, out of his house when I looked up the shipping address. But I was desperate. He held onto it for months with no feedback. I had to press constantly...
Type: Posts; User: JBLAddict; Keyword(s):
i do. Totally got scammed. Guy was in the Phx area, out of his house when I looked up the shipping address. But I was desperate. He held onto it for months with no feedback. I had to press constantly...
I also have a dead tweeter, is there a place to buy them (Canada?) or is it harvest season only?
if cost/availability is the key factor then yes, a tweeter matched bookshelf from the S series (S36 or 38) makes sense
but if size is the concern consider the PT, while 50% larger at the face, is...
correction, much more magic ;)
if you're "stunned" by the PT alone, the authority that will come with a crossover matched 14" PS1400 carrying 28-130Hz will have you searching for another verb. Do...
Hi All, long time no post. So.....I went back to this thread to find some other pieces of information and came across this post, which the first time I read it, was not yet a PS owner, as I have...
I'm thinking of adding a second HTPS-400 to my Performance Series 5.1 to feed my addiction. Question: How does one go about calibrating the system with multiple subs? guessing this may be a rabbit...
thanks, I did an "AIX records cal disc" run using DD-TruHD 5.1 and LCPM 5.1 outputs:
got level matched 70dB w/ THX setting (disables sub xover/gain) drop my preamp (sub-LFE, FL/FR-full) gain down...
Hi All,
just added an HTPS400 to my PS series HT, to complete the set.
I'm going from an L8400 with the Normal/LFE setting, where I used LFE for DD, DTS, SACD, DVDA
The HTPS has the...
remember reading that but never got around to it, will have to give it a try, how'd you qualify the noticeable difference?
just measured the plates on my two units with an IR gun, 85.3F and 85.8F, respectively, after a night being off and in a room at 70F. So slightly warm to the touch in idle, IMO less harm than the...
I took the recommendation of rd and widget that leaving them on was least stressful. Plus the auto feature doesn't work well. Im a 14 month owner
from your experience what are the most common misconceptions of the line?
thanks, that's good enough for me...
do you know where this can be found for the AVA7?
1500 amps when not in use? I don't quite understand how that would be or if that's true of all amps including mine?
I keep my PS1400 on full time since the triggers don't perform very well IME,...
since I'm using my HK AVR preouts, there's no trigger to the amp. Is there any harm other than some minor current draw leaving it on all the time so I can just turn on the AVR?
I have a HK AVR354 (75WpC x 7) that cost $700 new, made in china, consisting of the various s/w, Cirrus DACs, processors, connectors galore, and so on; one can only expect the amps to be so good for...
Thanks, if I hadn't had the opportunity to hear your PS setup several times alongside a bunch of other greats, there's no way I would have ever made the investment! Each return home had me realizing...
finally added an AVA7 to the PS 5.1 system and am back into audio bliss :spin:
I didn't realize how much my HK AVR was straining to power the system until getting this unit installed, wasn't fair...
what a combo :)
and luckily the previous post was emailed to me so I can read it for entertainment whenever, great stuff!
holy cannoli what a deal, and I thought getting a single Ti10K for $988 off Harman ebay was the bargain of the century
On the PS Engineering Design Specification, why does the supplier for the LE14H-3, 908Ti, 904Ti list "Nexus", similar to how the TMo25 lists, as we know, Audax. Are the LF, MB, MF outsourced as well?
Good points. I think you're correct that adjusting the LF to taste is a wise move!
Good point.
I will admit that while at times I wasn't happy with a perceived "overabundance" of bass from the L7, I do seem to be going to a bit of a withdrawal/adjustment to the PS/PT stacks. ...
I'm still working on that invite ;)
I will admit however, that I feel a little silly asking for FuzzMeasure/mike calibrations when I'm powering these fine speakers (for now) with a 75WPC HK AVR...