I'm using a GFA 555 II for my 4430's. I previously had a Crest FA901 ( with fan) in there but the difference is night and day.
Type: Posts; User: jaybird; Keyword(s):
I'm using a GFA 555 II for my 4430's. I previously had a Crest FA901 ( with fan) in there but the difference is night and day.
I was temporarily using E140's with 2235 kits in them in my 4430's when I refoamed the 2235's and I didn't notice any difference, but then, the room is so full of speakers and musical equipment a...
Has anyone ever measured E140's with 2235 guts to see what they look like?
All I use now for upgrades in leslies are Atlas PD60 drivers and Eminence delta 15b woofers when I'm using the original crossover.The Atlas is a little bright when new but after you get a few miles...
Would spikes reduce the amount of energy being transfered? My 4530's didn't have this problem, but then they didn't the bass either.
I have just recently joined the 4430 club and I don't know what to do with them. They are down stairs on carpet on cement floor. If i'm playing them at 70-8odb, the wife upstairs can't really hear...
Why doesn't somebody take a meeting with Harmon, voice concerns to them about the replacement parts and what the companies long term objectives are for JBL?
I have been using 4530's for over 30 years and they now reside down stairs with the original 2205's that I installed in 1982 when I built this pair, and I had an actual jbl pair to take all the...
I would like to go active with my 2235's added onto my current setup which is 3-way passive. I'm using 2205's on the bottom, 2420's on PT waveguides, (6 1/2 x 12) and 2405's The crossovers are custom...
Great collection and a bunch of Pearces to boot!--- I have three:applaud:
I just got two 299-16 drivers on MRII564 mantaray horns (actually one horn got tossed during dismantiling) . I can't find any disscusion of these drivers and horns. Would these mate well with 2235's...
I restored furniture for 20 years and my first choice was naptha or lighter fluid, it won't lift the finish.
This is almost the same thing I am doing but my lo-mid is in a horn cabinet made by Hill. I am using 3 QSC amps and a Rane ac23 crossover but I need a passive for the 2405
You can buy rolls of cork gasket from most autoparts supply stores. Take standard cardboard gaskets and jig up a bandsaw so you can trim them to the right thickness minus the thickness of the cork...
Sheffied 2 part wood bleach in a kit you can get at any good paint store warks really good on walnut.
Gentlemen!! Your keyboard jousting has brought forth some interesting tidbits on the design ,but how much will it effect the performance of say a K120 in a guitar amp or a stage monitor without the...
Thanks Edgewownd, I don't feel comfortable about doing, even with a new paper punch!
For you reconers That ocasionally have to use aftermarket voice coils, what is the best way you have found to vent them?
My apologies, I will repost.
Jaybird
For you reconers that from time to time have to use aftermarket voice coils, what would be the best way to vent them?
How would a 2235 work in a 4530 cabinet for home use ??
Wonderful find! Could those be redesigned to go on 2405's ???
To control the volume on stage, especially in 8 piece horn bands I used a stereo volume pedal between my jmp1, pearce, or boogie studio (too farty in the low end) pre-amp and a marshall 9005 tube...
Thanks for all the wonderfull info, all this hard speculating caused a pair of 2235s to pop up out of nowhere so I think i will put the 2220 kits in and leave things as they should be. Now I.need...
Has anyone used any silicone based products to glue surrounds to baskets and spiders to baskets, or what are your favorite glues you have had the most success with?