This is off topic but essentially the sub on the 212 connects in parallel with the upper frequency cabinets. The sub has right and left connectors for both red + and black - inputs. The right and...
Type: Posts; User: Edwards; Keyword(s):
This is off topic but essentially the sub on the 212 connects in parallel with the upper frequency cabinets. The sub has right and left connectors for both red + and black - inputs. The right and...
The physics here are simple....you want loud, go big!
I have made several postings on these forums, about my personal experiences with large JBL speakers, always thinking that big was better, and...
I have a pair of L-166 cabinets that the previous owner put a coat of flat poly on the top surface only.
I would like to remove this, but not having not too much experience with refinishing I'm...
I have posted on this before, But there is a fallacy on this Forum that bigger is always better. This is not true, so please do not make a buy decision based on what is selling at the highest a...
First off, the knowledge base here never ceases to amaze me.
My dad has a pair of L-300’s that he has had for many years. I want to know if these are early units, or later units. How can I...
As for the removal, you can always drill a pilot hole and use a wood screw to perform the extraction, or you can purchase this guys tool.
He has the pegs for you as well.
...
Steve: your profile is not accepting private messages.
Do you have any more of the tan cloth? Thanks Ed
I have always made a template by taking a piece of plywood ripping it in half, drawing the circle, carefully cutting it on my bandsaw, Sanding any high spots, and then quickly securing to a few 3/4...
Many years back, 1977 or 1978 I was in need of my first pair of real speakers. I had listened to the 166's and was ready to make a purchase. I went to the store with money in hand, and was ready to...
One of the biggest mis-conceptions in the Speaker world, is that bigger must there-for mean better.
My experience is that each speaker is made to work very well in a room with a given size. I...
Definately start out with fresh new glue, aliphatic resin, thin it with some distilled water, Mix well, use as little water and glue as possible, to moisten the inner wood fibers, then using some wax...
Hi:
I have a pair of L-212's that the previous owner had replaced the Tweeters, with something that was not original. I finally purchased a pair of the original 066's on ebay, but now I need to...
This is the age old story that plagues people in more than the area of electronics, it is applicable to cars, motorcycles, guns, computers, appliances, homes, furniture, and pretty much any thing...
There are at least 2 ways to manufacture veneer.
The first is to get a very clean log, ie no branches, and thus no knots, place it on a large lathe like device and spin the log slowly while...
The whiter wood as you refer to is Sapwood. Must lumber producers lessen the color variation by steaming these boards, then once stained the contrast should be even less. It may be that over time...
I had a pair of these about 12-15 years back. They worked very, very, very well in a very large room with 9 foot ceilings, 18 inches from the back wall, thick carpet, large drapes, I was driving...
Hi: Im a new 212 owner. one of the kind members here pointed me to the Owners manual, but my Bass Unit has an RCA input near the input thumb twist terminals.
Does anyone know that the RCA input...
Audio Research makes a unit that can accomodate up to 6 channels at one time. This is a current piece, and it is a bit on the expensive side at $6,995 MSRP, especially considering that it is all...
I have no affiliation with this place but I have done 5 transactions with the People at Millersound Labs, in Lansdale, PA. I ship the drivers to them, and usually have them back as good as new the...
I have had lots of work done by Millersound Labs in PA, They work fast, they only replace what is absoloutely needed, the results are like new from the factory, and the price is not much more than...
Can anyone help, I'm looking for a pair of the grilles for L20t's Preferably in nice condition.
thanks
Ed