Search:

The blue jumper wire on the LF crossover can also be changed, that will bypass the capacitors C1 and C2, the woofer will produce a lower frequency.

What size cap would you recommend for the 2245H sub? I read that one member has a .5ufd across the terminals of a different driver. With my little knowlege of this, if I put one on that is...

I agree, I am using tubes on the higher frequency, [horns] and SS on the lows. Not as harsh, not tiring to listen to the complete system.

Been in Calgary, went by train "The Canadian" from Ontario to Calgary were my kids live in the winter of 2001,the train stopped in Soux lookout, it was -52d celsus, my noise frooze together...

Car polish has silicone in it, you will not be able to touch up, varnish or paint ,just in case of a error in painting or need to be painted later after buffing if buffing does not work out, it's a...

:)Believe me, there is no other sub like it, I'll sure miss mine if it were gone, shakes the house with not to much effort, I power it with the Inter-M, 10.5 @ 350 watts RMS per channel. I built mine...

This is what I find is the best for polishing and finishing, has no silicone, but has a lubricant base and the very fine compond needed. I did many cars with this, one went under a tree branch and...

I post some pic on what I used in restoring to bring back a factory mirror finish on old antique cars tomorrow, this should work well on your repair.

First, I am a bit confused, 2245h recone kits are not being made anymore, is it game over for the 2245H? Or do we have to work with a after market kit? If so, how good is the after market kit? Or is...

I hope that I am not reading this incorrectly, that I can not get the 2245H reconed any more?

Yes , 25hz is about right, but symphony's and especially the big Euroupean and U.S pipe organs on the 32ft stop , the lowest note on the 32ft stop is right on the farest left on the pedal, note C...

I had the same problem at first, built right to specs from the audio magazine in around the 1980's. I bump up the lower frequencies with a equalizer. I find the you got to get the equalizer just...

;)Photos of the driver LE120H-1, also another photo of the LE120H-1, in the L7's that I bought new a number of years ago , they are original and have never been replaced.

Yes, that sounds about right, In Canada I had to pay $450 to get the 2245H reconed in around 1998, and this was a very reasonable person, who would try to get me the best deal possible. I find that...

Any instructions or manuals for reconing the 2245H driver? Can't be that hard to do, as long as I get the complete kit and glue. I would like to learn that, even if I have to pratice on a smaller...

Looking at my total, with duties and shipping and U.S currency conversion, taxes and UPS charges for handling fees for duties to Canada it's around $450.00, but over here if one wants it bad enought,...

I paid $850 for the 2245H in 1985, and $450 for a recone in 1997,here in Canada, I presume that 2245 and the 2245H are the same speaker.

Sounds like a good idea,I will try that, looks alot like my sub on page 1, I also have the JBL 2245H, and have a lot of problems with the windows rattling, glass going lose in the frames, nic-nacs...

JBL, L7's, Need some advise and your opinions, just finished buying all the drivers from E-bay for one JBL, L7 speaker. Used is used, I can not expext those drivers as being any better then what I...

Yes, that was a concern but with the room cosmetics I had to take in account, but I did experiment with setting them a few feet away from the wall ,mostly concerned about the rear bass duct and...

Just joined this forum , I had my brother inlaw build my sub encloser for the 2245H , 18 in driver. The plans came from the Audio Magazine back in ealy 1980's if I remember. The box is double layered...