Thank you for your reply!
The Altec 805 horn is built here in Sweden by AGA, licens from Altec.
I thoght that it was the same With the driver......!?
Now I'm told that AGA made drivers them...
Type: Posts; User: lasse; Keyword(s):
Thank you for your reply!
The Altec 805 horn is built here in Sweden by AGA, licens from Altec.
I thoght that it was the same With the driver......!?
Now I'm told that AGA made drivers them...
Hallo!
need some help With These drivers.
they are build in Sweden by AGA, licens from Altec.........that is what I'm told?!
so ......if They are Altecs ...? What model?
they came With...
Hallo !
I can se that this is an Altec bass !!
reconed........but ?
can anyone see what model it is ?
the seller say that it is one in the 515 series........??
lasse
Ok.......yes.............i know .........but........
Se if i can check the RTA with the Deq............
Or .....i`m just charmed of the mid bas .......dynamics........:blink:
Hi Lee
Yes i know that they are mid bas .......but with a little EQ they sound really nice.........don`t know if the Altec 416 bas makes a difference.....
The sound is very nice.......dynamic........
Do not miss the bass.........
Hallo !
A friend gave me a pair of old crappy 4560..............
How will they work with altec 416...........i will use subs .
to start with i will use 3110 a Xo with 2441 and a TraxTrix 400 Hz...
Hallo
Its been a while sins my last post.....:crying:
No no testing and mesures at al.
It just sounds fantastic.
Post a new picture .
Lasse
Hi
Thanks.
Yes, i will change the two top cabs so that the HF and UHF is on the outside .
The picture shows the first topcab that where done, the second is on the way.....
Still have to build...
Hej.
Tack !!
Drivers : 2231, 2202, 2441, 2405.
Have a DCX as bass XO at 290 Hz or a JBL 54?? with 250Hz cards.
Built this :
The only xo still left to build is that for the uhf.......so i have`nt tested the sound with the 2405.
My plan is to try and tilt the top cab and/or turn the cab so the 2405 is under the 2441.
...
Hi
Thanks !!
The 2405 is about 110 cm from the floor.
Lasse
Hi.
Made my first tryout with the 4355 clone.
The bas cab is an old Urei 813 , top cab is also an recycled old speaker.
If this wourks out well i start on a nicer looking cabinet.
Lasse
Hi.
Thanks Allan and Odd :)
Odd, i send you a pm .
Lasse
Hallo
yes i know that i need a 16 ohm l-pad.........but i have a hard time finding one here in sweden.
so until i find one i thougt that it maybe would be some other easy way to fix it !!
Hallo.
I am building a clone 4355 and have some problem to find a 16 ohm pot to the HF filter ( 2441).
Is it possible to use a 8ohm some how:confused:
Lasse
Thank you all :)
The ring is now superglued and the rattle is gone.
Lasse
Hallo
Ok......:crying:
Thougt that massring was one of the difference between 2231 and the 2235.
So if the ring is as it should be , i`m :).
Lasse
One of my 2231a started to rattel and make a strange noice.
The noice came direkt from behind the dust cap.
I cut the cap of .......see what i found:blink:
A massring in a 2231a .......the cone is...
Hallo
I have now finally all the drivers to start my biggest projekt so far.
The last part was the 2311 horn , Thank you Matsj:).
The 4350 / 55 have the two bas drivers in the same cab, would it...
Hallo !!
Badman......sure i can glue a lot of MDF board together round all with a rauter.....
But .......i`ts going to take some time......
I`ll be back.
(If you all think i`m rather short in my...
Hallo !!
The guy ho made these eggs only used a 5 mm plywood baffle !!
I`m building a new one in 25 mm MDF.
The drivers will be 2213 , 2105 and 2405.
The xo is still the biggest truble !!:blink:...
Thank you all for all the fun :p
Yes i`ve been in contact with Woody.......a very nice guy !!
Macaroony......thanks for the XO plans !!
I will start picking the eggs apart so its possible that...
Macaroony.......Its haloween time !!
The eggs is at the moment paited orange and lid up with candels in our garden :D
Here they are!!