Search:

The L220/L222 never used the LE5-6, they used the LE5-9 only.

This may be too obvious, but I’ll ask anyway. Have you tried turning up the mid and/or tweeter levels on the L112s?

IMHO L110s at $200 (recent Ebay price) have to be considered the JBL sleeper!

Ti Dome - What are the dimensions of the 904TI? Will they fit in a cut out for a LE5/104?

You would be close to Price Stevenson in Downingtown. I had a woofer reconed there a few years ago, they did a nice job.

Way back when I first joined this forum there was alot of talk about POS speakers. I had to ask what that meant and I was told "Paragon Off Shoots". I wondered what the Audax tweeter had to do with a...

The tweeter in the Tik series looks suspiciously similar to the Audax TW025A16. Anybody know if the Tiks use an Audax tweeter?

1 or 3 db difference in efficiency depends on whether you are measuring at 1 watt or 2.83 volts. 2235 are 8 ohm, LE15 are 16 ohm. Specs per BB6

Take a look at the 240Ti crossover. I would also add a zobel on the tweeter as used in the 250Ti.

It is against Ebay rules to charge a surcharge.

http://pages.ebay.com/help/policies/listing-surcharges.html
"Sellers may not charge eBay buyers an additional fee for their use of ordinary forms...

The L220 crossover can be substantially improved by adding bypass caps. It makes a very audible difference. Other than that I think it’s one of their better home crossovers.



I, unfortunately,...

L112 in the record store where the main character works in the NBC show "Committed"

Comparing the L220 to the L150 or L150A, the L220 uses a better midrange. The edge wound LE5-9 verses the round voice coil LE5-10. The L220 uses a better tweeter, the 076 verses 033 or 044. And I...

I was a bit surprised at first that they would drop support for the edgewound LE5/2105 and keep it for the round voice coils models. Since the edgewound was used in the pro gear, I would think that’s...

The tech sheet Giskard posted will tell what color wire is what. The photo shows where they physically connect to the crossover. The leads to the tweeter are connected at the resistors and are yel...

I believe the original L65 has the LE5 toward the center with the 077 to the left side, and the L65A has the 077 toward the center with the LE5 to the right side.

I haven't heard the 4430s, maybe someday (if you guys quit driving the price up by recommending them) I can pick up a pair. But I always considered the "best bang for the buck" to be the 240Ti for...

I just checked 122A and 128H both moved negative, 126A moved positive. Surprised me, made me thirsty too!

I thought of swapping the drivers in the 240Ti and L220 but never tried it. I will say that the sound of the bass of the 240Ti is closer to the L55, L101 than any are to the L220. I just got some...

I have LE14H-1s in a pair of 240Ti's. I have LE14As in L220s, L101s, L55s and S99s. I have various 12 inchers in 120Tis, L112s, L166s and L100Ss. Call me stubborn but I’ll take the LE14s, A or H,...

Out of curiosity I plugged tweeters with a fs 1445Hz and Qts of 1.3 and one with a fs of 1600 and Qts of 0.75 into a Xover pro model of the L110s. The higher Q definitely looks worse. I modeled the...

Found my notes on the tweeters I tested. But in looking at them now I am more interested in what Giskard brings up about the driver Q. I had assumed some problems I heard were due to rising fs. It’s...

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2545309018&category=23794


From an Ebay auction for a pair of 033 tweeters:


"The dust covers had been pushed in at one time and were pulled...

Giskard

Is that for the 035ti or 035tiA. I measured some a couple years back, I can't find my notes on what they measured but I do remember that the 035tiA was several hundred hertz higher than...

OK, point out where my logic may be faulty but it seems to me that a speaker’s motor assembly doesn’t care when it’s pushing a certain amount of weight whether it’s a mass ring on mass spread out...