Any pictures of the TL 900?
Type: Posts; User: elshout; Keyword(s):
Any pictures of the TL 900?
Thanks Grumpy. I was actually going to send you a link to this thread to see if you could give me an answer. I have seen enough of your post that I figured you would be one that could answer this.
Thanks Earl. That is what I needed to know. I will use a Marchand crossover. Thanks for your suggestion on the Ashley though.
I do still have a question for Earl or anyone else: If you use an...
I am looking to biamp my L300's and have attached a schematic that Giskard created. My question is, does this crossover require an active crossover or is this a "passive biamp crossover"?:confused:...
Hey 4343, thanks for the replies. I want to make sure I understand.
In your last diagram, the one above, I see the ultra high frequency circuit stays the same. No problem. My question is, in the...
I want to use an electronic crossover to bi-amp the L300's. I would like to build new crossovers to accommodate this change. I will be using a crossover schematic that member "4313B" posted several...
Here are the Cerwin Vega CS-18A.
Just wanted to add some more pics for those who like this line. I had two pair of T545's in 1986 in a Chevy S-10 and they were nice. People thought I had several 10 inch subs, but no, just the 4 -...
No, I am making some 4345 clones, but they are a little different. I wanted the L150 style/shape grill so I wanted to know what the frame looked like.
Does anyone have any pictures of a L150 grill without the cloth on? I would like to see how it is constructed. If you have some I will send you a PM with my email address so you can email directly.
...
Another thanks.
Thanks for your quick response. Just what I needed to know.
Can a 2123J be re-coned to a 2123H? (Could not find this after multiple searches)
Thanks in advance.
Scott
I have a guaranteed winner setup:
Jbl L300's with 2235 woofers
ADA Cinema Rhapsody (original, Mach 1, Mach 2, Mach3 or Mach 4) a must.
Nakamichi PA 7 or 7 A or Hafler 9500 or 9505.
If you...
Thanks for your help on this one!
Scott
Total parts used:
2 - 16 ohm 100 watt 3/8 shaft L-Pads: part number 260-261
2 - 8 ohm 100 watt 1 shaft L-Pads: part number 260-265
The 4 above are for the midranges
2 - 8 ohm 50...
Before and after.
When mounting both new L-Pads, I used the flat washers on the front behind the new nuts prior to tightening to prevent the nuts from cutting into the mounting board. (The original L-Pads just had the...
Now the Midrange will have a 16 ohm 100 watt 1 shaft L-Pad. There is not room on the board for 2 100 watt L-Pads, so I ordered a 8 ohm 50 watt 1 shaft L-Pad: part number 260-255 for the tweeter....
After you remove the 1 shaft from the 8 ohm L-Pad and the 3/8 shaft from the 16 ohm L-Pad, put the 1 inch shaft in the 16 ohm L-Pad, replace the nut and tighten the nut securely. (The gold colored...
With the back off, loosen the nut on the top that holds the shaft in place. Remove the nut and remove the shaft. (It helps to press the bottom of the shaft toward the L-Pad as you remove the nut, as...
The 100 watt 8 ohm and 16 ohm are the same size except for the shaft. The BIG news is that the shafts are interchangeable! (and the values of the respective L-Pads stay the same) So, here is how to...
I have received help on this site many times from the kind members, so I thought I would make a return contribution. I have seen this issue raised many times.
I needed to replace the L-Pads...
I know the Green wire goes to the Red woofer terminal and the Green/Black wire goes to the Black woofer terminal. I know the White wire goes to the Red midrange terminal and the White/Black wire goes...
I recently bought a Nakamichi PA-7 (200 watts per channel) that sounds great with my L300a's. I run it at about 85% volume level and IT SOUNDS GREAt!:applaud: I have the mid and treble set at...