Search:

Type: Posts; User: 1audiohack; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.54 seconds.

  1. For sure! Barry.

    For sure!

    Barry.
  2. The Chinese junk I keep taking out of 4Ē drivers...

    The Chinese junk I keep taking out of 4Ē drivers and ring radiators says nope.

    What they get really wrong on the large format diaphragms is the clearance between the phase plug and diaphragms....
  3. HI Rob; The 2227 uses the 2242 motor...

    HI Rob;

    The 2227 uses the 2242 motor assembly. It has a .5" or 13mm top plate and the pole piece / back cap is deeper for more coil travel. The the 2206 2226 2241 top plate is .375" or 10mm.

    ...
  4. One more tidbit, 2227 is too deep to fit in the...

    One more tidbit, 2227 is too deep to fit in the 4550ís. The rear plate of the motor rests against the back cover of the cabinet restricting the motor vents.

    Barry.
  5. Replies
    43
    Views
    2,072

    Awesome work HSCGuy! Barry.

    Awesome work HSCGuy!

    Barry.
  6. Hello All; There are better amps here amps...

    Hello All;

    There are better amps here amps here and something else will make its way in if only for comparison. At some point everything in the chain becomes suspect. A very quiet amp would be of...
  7. Hi All; Home for the holidays I am finally...

    Hi All;

    Home for the holidays I am finally making some headway on the PWT and measurement platform front. A while back I bought a LarsonDavis lab grade high SPL mic (pr) and a 200V preamplifier...
  8. Agree. The McCauley horn looks open much deeper...

    Agree. The McCauley horn looks open much deeper or with out diffraction form all together ie having a smaller dispersion pattern. A better pic would help.

    Like Riley said, a smaller pattern in...
  9. Hi Riley; Until a post or two after the one...

    Hi Riley;

    Until a post or two after the one you quoted me here, I didnít know if he was in the great outdoors or in a closet.

    I havenít heard the horn newbie has but if he is looking for a big...
  10. 30Ē X 16Ē That looks like a big nice horn. 64...

    30Ē X 16Ē That looks like a big nice horn. 64 questions:

    Are you using them at home?

    What BSS unit do you have?

    What speaker compliment is under these horns? Like 15ís and subs or?

    ...
  11. Do you have the 22A or 22T compression driver on...

    Do you have the 22A or 22T compression driver on your horns? Do you have the passive crossovers that Peavy used for these systems?

    I found the spec sheet for the mark three system but wonder...
  12. There may be a clue right there. Is this the...

    There may be a clue right there. Is this the sound you like or are after?

    Very high frequency does not travel far before it gets absorbed by air so systems like you describe use bullet tweeters...
  13. Hi; There are many patient knowledgable...

    Hi;

    There are many patient knowledgable people here that are glad to help. You need not pass an exam to be here. :)

    On a stretch the 4342 horn can play low enough in frequency to work with...
  14. Replies
    18
    Views
    1,246

    Love it! Good work!! Barry.

    Love it! Good work!!

    Barry.
  15. Replies
    2
    Views
    410

    Crazy About Color

    It drives me mad! Ever wonder if we might ever get the JBL blue nailed down?

    Finding houses with a great paint color combination and knowing that I will never be able to nail it down unless...
  16. Replies
    69
    Views
    3,537

    Damn I lied. This hard drive is on XP. :( So...

    Damn I lied. This hard drive is on XP. :(

    So sorry!

    Barry.
  17. Replies
    69
    Views
    3,537

    Hi Rob! Before I tell a lie and say yes, I...

    Hi Rob!

    Before I tell a lie and say yes, I had better slide the old hard drive back in and make sure that my memory isnít lying to me. Will do it tonight.

    Barry.
  18. Replies
    69
    Views
    3,537

    LinearX. Mine runs fine on 32 bit Win7 last I...

    LinearX.

    Mine runs fine on 32 bit Win7 last I used it.

    Barry.
  19. Replies
    69
    Views
    3,537

    I thought they were done but didnít know if...

    I thought they were done but didnít know if someone had got that ball rolling again.

    Sorry for the divergence.

    Thank you.
    Barry.
  20. Replies
    69
    Views
    3,537

    Is there anything left of LinearX? Barry.

    Is there anything left of LinearX?
    Barry.
  21. Replies
    5
    Views
    766

    The 2241ís are factory retained in theater and SR...

    The 2241ís are factory retained in theater and SR enclosures with 10/32 fillister head Phillips screws which have a head diameter of 0.300Ē

    Barry.
  22. Thread: Jbl 4349

    by 1audiohack
    Replies
    33
    Views
    6,885

    I would love to hear these. Made in CA? ...

    I would love to hear these.

    Made in CA? Hell yeah!

    Barry.
  23. Replies
    15
    Views
    1,938

    I have often seen X max as measured by the...

    I have often seen X max as measured by the maximum amount of travel that there is always coil filling the gap, in an overhung design as in this example. A 10mm top plate with a 20mm coil gives 10mm X...
  24. Replies
    15
    Views
    1,938

    That's my bet as well. Barry.

    That's my bet as well.
    Barry.
  25. Replies
    15
    Views
    1,938

    I wonder if Kenny at Upland Loudspeaker could...

    I wonder if Kenny at Upland Loudspeaker could re-create them?

    Barry.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4