If there was a perceptible difference in the bass response between a Rane and Ashly analog crossover one of them is broken. The circuitry just isn't that different. Did you test the suspect crossover...
Type: Posts; User: Riley Casey; Keyword(s):
If there was a perceptible difference in the bass response between a Rane and Ashly analog crossover one of them is broken. The circuitry just isn't that different. Did you test the suspect crossover...
Based on my testing of Chinese knock offs of EV DH1 diaphragms you have about a one in four chance of getting parts that match the original - or each other. Now that was ten years ago so perhaps...
Because it looks good on the spec sheet and helps sales to people who listen with their eyes and wallets rather than their hears
That is the driver used in the current mid sized VTX20 line array box . If you've been to a show using those boxes you've heard lots of those drivers. In those boxes the drivers ( it uses three...
" microdetail" in a compressed Youtube video ?
There are probably ways to make valid comparisons that would involve recording with good microphones at specified distances from the baffle to...
Curious as to why you chose second order crossover filters when you had fourth order available and why you chose the 1/3 oct for the eq rather than the parametric.
Waf ?
36" is the correct dimension. I know because a pair of the cabinets stacked put the horn on top at eye level with me. We used the 2220s because they matched the 2220s we used in the 4560s at the time...
It helps to keep in mind what different speaker system designs were intended for when they were new. The 4311s were designed to sit on a shelf along the meter bridge of a studio mixing console for...
They sounded great with dual 2220s and others with K140s. I painted them grey and trucked them around the countryside using them for concerts. Probably not much help in answering your questions but...
Built lots of them ... in the late 70s - early 80s :D Whats your question?
Nothing wrong with well designed plastic horns. It’s aluminum that makes a poor material for horns. The 2350 & 55s had to be coated with plaster to reduce the resonance but never really eliminated...
One trick people experimented with back in the day ( before we gave up on 4560s altogether ) was to mount a horn in the 4560 horn with the HF driver acting as a sort of low budget phase plug for the...
I suspect he means the vertical distance between the woofer and the horn. In front loaded speaker systems this distance would likely be less than one wavelength at 1khz. When listening at a distance...
Hate to say it after the fact but it's actually easier to damage a speaker rated at 100 watts with a 20 watt amp than with a 200 watt amp. Music by its very nature requires the most power to produce...
Not familiar with ATX amps but if it has RCA connectors it is likely has a fairly high sensitivity often in the range of -10dbv. Your Yamaha EQ and AudioArts crossover are designed for amps with...
I hadn't really connected your forum nickname to your post before but if you really want a speaker system that sounds like a live sound system from a mid 1970s R&B concert in the USA your 4560...
The 2350 radial horn was often used with the 4560. Makes life pretty hard on the 2440 / 41 drivers often used with them but that's how it goes when using a speaker cabinet designed for 1950s movie...
Speed reconing. Makes me glad I spent the days with the Mexican ladies on the recone line in Northridge. Nice that he cautioned about the Tee-nuts but he could have mentioned the trick to resetting...
Just be extremely obsessive about protecting the voice coil gap from bits of paper or glue getting in there. Use low tack masking tape like the blue tape sold for paint masking. Cutting the dust cap...
Found on the Google. YMMV
87959
In the pic you have at least one 10 ohm and one 1.2 ohm so they don't all appear to be the same value. Unsolder one end of each resistor and read the values on the other side. Installing them with...
Might want to hang on to those 2202s if youre thinking of getting some 2344 horns. The 2202 crossed in to a 2344 with the one inch driver of your choice ( I’ve use 2426s for years ) is imho a much...
Try a different browser?
The whole 15" woofer crossing directly into a compression driver type of speaker design is a very 1950s way of approaching a world of 15 watt tube amps. As transistor amps became more powerful three...