please i would like to know if the 2213H woofer jbl is positive or negative transducer...
very thanks in advance
luigi
Printable View
please i would like to know if the 2213H woofer jbl is positive or negative transducer...
very thanks in advance
luigi
Positive
[QUOTE=edgewound;439792]2213H/2213/123A-3 = Positive voltage applied to the BLACK terminal results in forward cone movement.
POSITIVE voltage a black terminal ??? BLACK ??? No phase test ??
deaer I have 123A-1 and have tested It ..It is positive . and NOT OPPOSITE !!!
2213H Positive voltage applied to the BLACK terminal results in forward cone movement.
I still do not understand ... there was someone at the jbl who was not well headed they made a mess !!!
[QUOTE=BMWCCA;439804
]It is what it is. Worked for them, and easy to test/check
. Is that a problem?
no problem I would just like to understand, ( positive voltage on black terminal....:confused:
Not sure JBL really cared about what others thought.
of course you... but if you are a big company and you create confusion ... I don't think it's ok
If you take a driver out, mark how it was connected or take a photo.
I have driver out my 123a-1 end it are positive transducer if test it with positive voltage on red terminal of the driver
it are negative transducer if test it with positive voltage on black terminal of driver
in both cases I disagree with data sheet jbl about it:crying:
"""2213H/2213/123A-3 = Positive voltage applied to the BLACK terminal results in forward cone movement.
2212/123A-1/126A/D123 all share the same motor and are opposite.""
Unless of course they screwed up at the factory and have a reverse polarity on the magnet. We know this to be the case in maybe 2% of the speakers..., present company included. Shiite happens.
[QUOTE=imai;439806]It's pretty simple, really.Quote:
Originally Posted by BMWCCA;439804
A question was asked, and I responded with the correct answer. Analysis paralysis is futile. Just accept it and move on.
Test polarity with battery.
http://www.troelsgravesen.dk/polarity.htm
http://www.troelsgravesen.dk/polarit...ty-drivers.png
Information like this is yet another reason why this site is such a great resource.
I finally ascertained that the woofer 123a-1 and positive transducer
and the 2213h and a negative transducer.
I ask you having foolishly replaced the 2213h with the 123a-1 in my 4312 first series (with original crossower
)What should I do ? reverse the wires behind the 123a-1?
to have a right crossover ?
thanks for the help luigi
:banghead: