4 Attachment(s)
DIY Everest DD66000....finally
Dear forum Friends
It was a 2 year project but finally the cabinets are ready for pickup. They are still at my carpenters shop but will be picked up soon. Many thanks to my Carpenter for his outstanding work!
The components to be used are:
4x JBL 1500AL
2x JBL 476Be
2x JBL 045Be-1
Thanks to Giskard for his help to get these incredible stack of componets together!
I must confess that all crossover parts are still sitting on the shelf and I didn't manage to make the crossovers yet. I bet I'll be fast when the cabinets are here.
I will post some progress here but it will need some time as I'll do it right. :bouncy:
1 Attachment(s)
Project continues: LF in room response
This is about the best in room response I ever measured!
Normal room
No treatment
Very insensitive to room modes
Flat within +/- 3dB down to 10Hz :eek:
101dB SPL :shocking:
Reworked EV2 LF1 and LF2 crossover for usage of 1500AL's as worked out here
http://www.audioheritage.org/vbullet...00-h9900-h4365
I'll post full schematics when finetuned.