I know they have to be out there somewhere, but my Goggling gets me bupkis. TIA.
Printable View
I know they have to be out there somewhere, but my Goggling gets me bupkis. TIA.
The L200b info can be found here: http://www.audioheritage.org/vbullet...hp?23408-L200b
As for the original L200, it might as well have never been measured :p
For one thing the LE15B woofer that goes in them has no published T/S parameters (that I know of).
Here is the only info I could find on that woofer back when I had one at hand: http://lansingheritage.org/images/jb...pro/page13.jpg
(2215 = LE15A, 2216 = LE15B)
Anybody? I've got my eyes on a nice local parametric eq and would like to address some of the issues around the crossover point that "fixed" with the 200B change. And Barry, I don't really understand your response. Did you find something I didn't or are you trying to be funny? If it's the former, please post a link.
I think he was being playful with ya ...
You said you tried Goggling and got bupkis, so he recommended Googling ...
https://www.google.com/images/srpr/logo11w.png
No matter what the curve is.. a std Eq and Sound Meter
are looming in the wings..
If anybody has a useful response, please post it here.
:blink:
Hi, audiomagnate,
I just Googled "JBL L200 frequency response curves", and got quite a bit of into to sift through. Give it a go, and I'm sure you will find what you seek. Unfortunately, I don't have the time to wade through all that information that is going to come your way in this search, but hopefully, this will get you what you are seeking. Good luck, and have fun!
Doc
Hilarious Heather. Here's one of the helpful documents your witty "search" turns up: http://www.jbl.com/images/media/L200_OM_EN.pdf The rest are unlabeled at best, or start way too high for my purposes, even if they are for the correct speaker, which I doubt.