Printable View
Hi!
I hava a question, I bought these speakers 6 months ago and when the installer would set the amp so there were, according to him only presets for 3632 for my Crown DSI 4000.
The same was for my Surround speaker 8320, there were only settings for the old model, do you know if it has come any settings/tunings for the new model (3732 and 8320) for the Crown DSI series?
Did you check there?: http://www.jblpro.com/catalog/genera....aspx?CatID=18
Hi,
For my 3732, I found the tuning in the latest version of HiQnet.
http://hiqnet.harmanpro.com/software/
Stéphane
http://www.audioheritage.org/vbullet...02h&highlight=
Quote:
Originally Posted by Eaulive
Hi Eaulive!
Yes I tried that way but dident find anything for the 3732 and 8320
Hi Stéphane!Quote:
Originally Posted by stephane RAME
And thanks for the tip!
I'm really a novice with these pro stuff so I need some help to get started ;-)
I downloaded the software but I do not really know where to find the tunings?
Choose CROWN DSIQuote:
Hi Stéphane!
And thanks for the tip!
I'm really a novice with these pro stuff so I need some help to get started ;-)
I downloaded the software but I do not really know where to find the tunings?
Select Model 3732 BI or another.
Open the filter to read the value.
Stéphane
Hi
Welcome to the club, if properly tuned you will have a impressive system.
What I have now is perfect.
It depends how your setup is? Are you using bi-amp, tri-amp, how many speakers and amps? Is it for home use?
Some pictures would be nice.
I myself was a novise in the beginning, you have to get yourself familiar with the HiQ net and JBL settings in the Crowns before you get started.
I will help you as much i can from my own experiance.
Remember, what I know of, there is no settings for the subs 4641, 4645C and 4642A, it is all room depended. Good starting point is, highpass depends witch sub is being used according to spec and lowpass at 80Hz.
Thanks
Here is my system!
3st JBL 3732 biamp as frontsystem
4st JBL 8320 (Surrounder)
1st JBL 4645c (on its way) today I have 2 st Elemental design A7s 650 subbs
3st Crown DSI 4000 for the front system, 2st Crown DSI 1000 for the surronds
Onkyo PR SC 5507 Pre amp
Marantz UD 5005 bluray (using hdmi to transmit the data to my preamp)
Some pictures om my room, it is 3,4m high, 5,6m wide, 8,9m long
http://img826.imageshack.us/img826/1204/g105163.jpg
By fischer1100 at 2010-10-09
http://img826.imageshack.us/img826/8847/g105174.jpg
By fischer1100 at 2010-10-09
Hi,
Beautiful audio video system.
Have you found tunings ?
Stéphane
Thanks!Quote:
Originally Posted by stephane RAME
No I havent find it yet!
Were in the system architect 3,0?
I find it thanks to Mctwins :D!
Attachment 53866
Choose CROWN DSI
Attachment 53867
Select Model 3732 BI or another.
Attachment 53868
Open the filter to read the value.
Stéphane
Now I have the right tunings for my speakers, many thanks to you all:cheers:!
Hi
Do you notice any difference and do have more bass now?:)
I notice that you have Onkyo, it is important that you have straight signal from this pre so you are not involving, like, EQ and x-over settings from Onkyo.
Thanks
Has unfortunately not been able to play as much since I upgraded the software, so I may come back with the impression when I played more.Quote:
Originally Posted by Mctwins
As for the Onkyo Pre amp, I run Audyssey today and think it works well, feels like the speakers disappear and the sound becomes more complete with it, but you never know what the next upgrade will be ;-)