Hello,
For anyone interested, I have modeled the recommended biamp curves from the system information thread using winISD Pro so it can be reproduced with an active crossover.
hope this helps
Printable View
Hello,
For anyone interested, I have modeled the recommended biamp curves from the system information thread using winISD Pro so it can be reproduced with an active crossover.
hope this helps
You're welcome :)
The acoustic curves show a crossover point at 600Hz, but if you look at the votlage drive of the passive crossover it is quite similar to the active one:
http://www.audioheritage.org/vbullet...1&d=1220468993
So you may well end up with a 600Hz 18db/oct crossover point when adding the natural response of the drivers