Welcome To The Lansing Heritage Forum!
Quote:
Originally Posted by
cooky1257
I intend to replace and/or double up the front baffle with some nice grained 'finished' plywood and utility satin dark grey the rest.
Sounds like a smart way to do a quick fix without too much effort. I am not sure what sort of thing is available in the UK, but here we have a limited selection of pre-finished sheets of plywood. I see no harm in sticking a sheet of 18mm stock over the existing baffle. For the woofers a simple rough cut followed by a flush trimming router should bang them out, for the 2405 you will need to make a larger hole in the original baffle so that the 2405 can be mounted directly to the new baffle. As for the 2397... that'll be a little tricky. Are you handy with a saber saw? I guess I'd build a jig and use a flush trim bit on a router for that as well, and then file the corners.
Quote:
Originally Posted by
cooky1257
My main question is regarding the driver layout, in the TM1 and TM3 the UHF is much closer to the mid horn and this is an ideal opportunity to reposition things if it would be beneficial.
I would stick with the layout that you already have. The 2405 has a wide dispersion and if it was any closer to the 2397 you would get more reflections from the high frequencies bouncing from the underside of the horn.
Quote:
Originally Posted by
cooky1257
As a confirmed big Tannoy user since a lad I'm quite enjoying my move over to the dark side;-)
So you have fired them up and are happy with the sound?
Widget