Mounting Screws for a 2241

I'm doing some work on the Merman cabinets and noticed that builder used wood screws to hold the 2241s. :eek: I want to change these to Allen keys/Tee-nuts. What is the better fit 1/4-20 or 10-24?

Thanks

The 2241’s are factory retained in theater and SR enclosures with 10/32 fillister head Phillips screws which have a head diameter of 0.300”

Barry.

Thanks.

Then a couple of these should do the trick.

https://www.parts-express.com/parts-...g-kit--260-776

FWIW,

A few decades back I moved all my PRO stuff to 1/4-20 T-Nuts + Fillister headed bolts.

1/4-20 stuff was simply a lot easier to find at the time.

:)

I prefer the Allen key to the Fillister head because I feel there is more opportunity/possibility to put the screwdriver (pressing down) through the surround than an Allen key (turning laterally) when tightening the screws.

I use 10-32 and 1/4-20 allen cap head screws on all my cabinets.

I also use 10-32's to mount my rack equipment with.