Originally Posted by
pathfindermwd
Yep, yep, yep! Exactly! The manual is poorly written. For example, it does not clearly explain that the electronic XO is for line level input in "normal" mode, docked and un-docked explanations have little to do with it. The passive XO is "in line" to the PT800 and must be used when speaker level signal is engaged and passed on, regardless of switch position. And, if "separated" is engaged, the sub (LE143) will play on to 300hz unless an eternal XO is used. The switch ought to say 130hz/300hz. The 130hz passive XO should have been put in the PT800, space not an issue, and therein lies the confusion, I think. I don't know why they didn't just say that if used alone the PT800 should have a 130hz crossover signal, though pointing it out is moot since we have long ago gone over the fact that the PT800 will not play below 80hz and a XO is really not needed. I played mine at full signal, no problem, there is not much bass there...
Can we call this one solved? :D