Le14h-1 top plate thickness

Can anyone confirm the top plate thickness
of the le14h-1. .280?

xmax = 5.97mm
5.97*2= 11.94mm
.280 = 7.1mm
is the vc depth 19.1 anyone
19.1-7.1/2=5.95


Is the vc depth missing a decimal here

http://www.jblpro.com/pages/components/2235h.htm

Attachment 76051

The le14h shares the top plate along with a
3/4 magnet with the 2235h, 2205h, etc
(.281) tp is this correct

Quote:

---

Originally Posted by 4313B

The LE14A and LE14H have a mechanical (voice coil overhang) xMax of 4.45 mm, the LE14H-1 has a mechanical xMax of 5.97 mm. That's measured one way. (Voice coil winding depth - top plate thickness) / 2.

JBL often measures xMax as the amount of travel required to reach 10% distortion. Sometimes xMax is published as measured full travel instead of one way.

---

All the LE14's that have the thickness specified are ~.28", but that's the -3 and -4.

You trying to franken woofer a LE14H-1 out of a 2235?

With the 4315 one I'm doing yes I think
I'd like to have a set of le14h's to go with the le14a
i have seen some le14a baskets reasonably
priced, the top plates on both are .280
an use 3/4" mags. So this gives me an impression
they both use the same magnets n have the
same gap. The 2205h is on
that list as well, they are sub $40.00 to date. Le14h
i have seen are priced over $350.00.
Seems more economical to build a set IMHO.

Quote:

---

Originally Posted by JeffW

All the LE14's that have the thickness specified are ~.28", but that's the -3 and -4.

You trying to franken woofer a LE14H-1 out of a 2235?

---

This is the gaps & depths.
Much of the information I have came
from this thread

http://www.audioheritage.org/vbullet...php/t-624.html

Quote:

---

Originally Posted by bldozier

Can anyone confirm the top plate thickness
of the le14h-1. .280?

xmax = 5.97mm
5.97*2= 11.94mm
.280 = 7.1mm
is the vc depth 19.1 anyone
19.1-7.1/2=5.95


Is the vc depth missing a decimal here

http://www.jblpro.com/pages/components/2235h.htm

---

Voice coil length is 19 mm (0.75") Top plate for all those LE14Hś are .280" if remembering correct Voice coil is over-hung in those LE14Hś
But I dont think it is for the LE14Aś (with Alnico motor)?
http://www.audioheritage.org/vbullet...?10665-LE14H-1
In this link X-max is specified to be 8.5 mm :blink: I also found this old post from 4313B:
http://www.audioheritage.org/vbullet...ll=1#post36576

Thanks
i have gotten a le14a pair already, now looking
into building le14h pair.
So to build a le14h; could I use a 2205h/2235h motor
amount a few others��
Brian. ( big fire down from my apt it's been an hour
I can smell it now )

This is the rest of the thread from where I linked the 4313Bś post (maybe interesting for you because they are discussing the LE14A to get an LE14H (-1)
Whats burning near you? sounds scaring :eek:

http://www.audioheritage.org/vbullet...7-Recone-LE14A

Idk there is a few developments down there and a few homes
Trucks are still passing.

I read them then I will have another look.
I'm fairly certain these are the same but
without a heads up hard to be sure

http://www.audioheritage.org/vbullet...p/t-33929.html

yes the Vc are the same, in the 2235h & le14h

does anyone know if the 2203vc is the same as the
latter depth and gap are equal