5way design help

thanks,
so iam contemplating the horn configuration on a 5way cabinet i plan to design, and id like to go with two horns
2420/2420 & the 2440/2441.
i see folks setting up the horn as a facet into the baffle design attaching the horn w/ some adhesives,

can anyone give me input on using the 2307/2311 with radial horn/lens type configuration. maybe just lop of the back half of
the radial horn to attach it flush to the front baffle & reconfiguring the internal veins.

second what about a 2 piece 2397 type horn which can attach internally and externally. (not using the 2307/2311)

bldozier,

The way I installed the big horn is not flexible, i.e., it will be difficult to remove the horn from the cabinet, but I
have no ability try others. Don't laugh at me.

1. Cut the holes on the front panel
2. glue the horn on the front panel
3. Install two horizontal wood boards inside the front panel to clamp the horn; also as the cabinet bracking
4. Use homedepot roof sealing coating internally to make sure no gap between the horn and the cabine

Regards,

azzd

Quote:

---

Originally Posted by bldozier

thanks,
so iam contemplating the horn configuration on a 5way cabinet i plan to design, and id like to go with two horns
2420/2420 & the 2440/2441.
i see folks setting up the horn as a facet into the baffle design attaching the horn w/ some adhesives,

can anyone give me input on using the 2307/2311 with radial horn/lens type configuration. maybe just lop of the back half of
the radial horn to attach it flush to the front baffle & reconfiguring the internal veins.

second what about a 2 piece 2397 type horn which can attach internally and externally. (not using the 2307/2311)

---

Take a peek.

Attachment 78687