Hi Synthetic
FIR precision is linear and depends on the number of taps relative to the sampling frequency.
It is also predictable and rePhase will show you exactly what you will get with the red curve, which is basically an FFT of the FIR.
So if the convolution engine does its job correctly (which is the case with the openDRC which implements a very straightforward time based convolution), then that is exactly what you will get on the output.
Quote:
The rephase settings above have format set to "32 bits floats mono (.txt)". I could be mistaken, but to get miniDSP to load it I think it needs to be changed to "32 bits IEEE-754 mono (.bin)".
Yes, my bad, I used the txt format to export the impulse to HOLM and do the comparison screenshot.
Gotta do the LF part next !