Thoughts on The Carmel by Altec??

Printable View

08-16-2009, 10:26 AM
Cooljjay

Thoughts on The Carmel by Altec??

Just pulled these down from the rafters at an estate sale and nope there wasn't stairs. I was curious on your thoughts about these? I like the sound and they sure do rattle the walls. Someone mention I should change out the crossover caps..good idea? I am currently figuring out how I want to go about refinishing the cabinets, the whole sun bleach effect doesn't do it for me. If anyone has an original article/catalog/flier on them it would be great to see. Heres some photos

http://i27.tinypic.com/4l5dn8.jpg
http://i31.tinypic.com/11ugm07.jpg
http://i30.tinypic.com/2nszfs.jpg
08-16-2009, 12:01 PM
Goodwill_HiFi

I don't know anything specifically about Carmels, but they look like a good project. After seeing some of your other work on AK, I feel confident that you'll be able to do something about the finish...... I've never seen bleaching like that on wood.... a cone yes, but the wood?

Replacing caps in crossovers likely isn't anything specific to the Caramels..... that's standard operating procedure for many people when "new" vintage speakers are acquired.
08-16-2009, 12:56 PM
oznob

Quote:

Originally Posted by Cooljjay

Just pulled these down from the rafters at an estate sale and nope there wasn't stairs. I was curious on your thoughts about these? I like the sound and they sure do rattle the walls. Someone mention I should change out the crossover caps..good idea? I am currently figuring out how I want to go about refinishing the cabinets, the whole sun bleach effect doesn't do it for me. If anyone has an original article/catalog/flier on them it would be great to see. Heres some photos

http://i27.tinypic.com/4l5dn8.jpg
http://i31.tinypic.com/11ugm07.jpg
http://i30.tinypic.com/2nszfs.jpg

http://www.audioheritage.org/photopo....php?photo=257
08-16-2009, 01:01 PM
oznob

http://www.audioheritage.org/vbullet...ghlight=carmel

Here's another interesting thread. You could do a search and find other posts on these speakers. Nice score BTW!:applaud:
08-16-2009, 03:21 PM
Robh3606

Nice score!!

I hope you can fix the water damage on the one cabinet.

Rob:)
08-16-2009, 03:42 PM
grumpy

I think that's the third base/plinth type I've seen on Carmels/Avalons.

Looks like a reveneer might be needed, even so, that's a very listenable
combination (worth the bother, IMO).
08-16-2009, 05:44 PM
Cooljjay

Thanks for the links, I just went out and bought the XL size of dark walnut stain so lets see if I can get some cool on these pasty old ladys :D I was wondering if anyone knows how hard it is to remove the grill? I would like to attempted the inside out trick to see if the backs are in better shape then the fronts. Here is a picture of the driver arrangements.

http://i29.tinypic.com/23vi79d.jpg
08-17-2009, 06:20 AM
Chas

Wow, your pictures take me back a few years. I bought a pair in 1981. Mine were much darker, like typical oiled walnut. The grilles are not removable, at least I never figured out how to do it.

Good luck, your efforts will be worthwhile. :)
08-17-2009, 03:35 PM
grumpy

If you succeed in pulling the baffles or grilles from the Carmel's, please
document what you did here. I promise to do the same if I ever get to it
(nearly identical Avalon cabs I found with modified baffles).
08-18-2009, 04:07 PM
Cooljjay

Well I will warn don't attempt to remove the grilles. I was going at it last night and removed the horn, and started removing the woofers, one wouldn't come out so I gave a tug :banghead: well turns out the goop altec used glued the woofer to the baffle. I repaired the surround the best that I could but I tore at least an inch. So be warned to not remove the woofers. I have stated the refinishing of the cabinets, after I determined there isn't a way to remove the grille. I tried to just stain and lacquer the cabinets but when the stain was applied it look just hideous because the bleaching of the wood, it was really uneven. I decide to pull out the can of dark walnut toner and toned them dark. I will need more toner but it seem to be coming out nicely. Here is a picture of the damaged veneer, after the repair and sanding(no I didn't replace the veneer) and then a after with the toner and stain lacquer applied...still have the front and one side to do.

http://i30.tinypic.com/2nszfs.jpg
http://i26.tinypic.com/2vvntld.jpg
http://i25.tinypic.com/2itsvvr.jpg
08-19-2009, 03:14 PM
westend

Well that's a very nice repair job, night and day from the damaged to the refinished look.
08-19-2009, 05:56 PM
Cooljjay

Well like I said I couldn't get the stain evened out so I used toner to tone it to a nice dark finish. I wasn't sure if I was going to like it, but I think I am starting to like it. With the faded grille cloth it looks kind of like look at my big speakers. I ran out of toner so I can't get to the other one for a while, and this one could use some touch ups on the front but looks 100% better in my book. What do you guys think?

Before
http://i29.tinypic.com/j6kahi.jpg

After
http://i27.tinypic.com/14o82zc.jpg
08-20-2009, 09:05 AM
Goodwill_HiFi

While I'd prefer to see more of the grain, that does look really nice! Could you tell me/us more about toner? I don't normally don't associate that word being used with wood finishing..... how is it different than a stain?
08-20-2009, 03:11 PM
Cooljjay

Quote:

Originally Posted by Goodwill_HiFi

While I'd prefer to see more of the grain, that does look really nice! Could you tell me/us more about toner? I don't normally don't associate that word being used with wood finishing..... how is it different than a stain?

Here is a good web site that explains toners and saves me a lot of typing http://www.woodweb.com/knowledge_bas...oner_Tips.html

I use mohawk toners which can be bought from radiodaze.com since its more a specialty item that has been forgotten and no one supplies anymore.
08-20-2009, 03:23 PM
Goodwill_HiFi

Quote:

Originally Posted by Cooljjay

Here is a good web site that explains toners and saves me a lot of typing http://www.woodweb.com/knowledge_bas...oner_Tips.html

I use mohawk toners which can be bought from radiodaze.com since its more a specialty item that has been forgotten and no one supplies anymore.

Thanks..... I still am a bit unclear on it, but I'd probably have to see it done to fully understand. For instance if the toner is opaqe how would you use a stain on top of it...... or maybe stain is only used on top of non-opaque toners?
08-20-2009, 04:30 PM
Wagner

Honestly? Too dark, and too inconsistent from too quick to jump to stain.
Stain is a last resort for me, especially on quality species of wood.
I understand you're trying to deal with a damaged surface, but there's better choices to try first.
STAIN: I try to avoid it at all costs and after I've exhausted all other alternatives.
If the damage is chemical in nature, maybe you made the only choice, but if it's just sun (and looks like moisture may have been at work as well) I always try to save the piece with tinted oils.
Once the area of major trauma is close to matching, then maybe, just maybe, a judicious thin and quick wipe of species appropriate stain to help blend and tie things together.
BUT, this process takes time and most folks want a quick fix (gratification).
Doesn't work that way with restoration work.
Not trying to be an ass, it's just that I learned this the hard way and have to be reminded of it every time I look at certain "projects" around the house. With deep regret. :(
That's why I approach stain with such prejudice: it cannot be undone.
Very nice speakers; may I ask what you paid for them?
Enjoy,
Thomas
08-20-2009, 05:17 PM
Cooljjay

Quote:

Originally Posted by Goodwill_HiFi

Thanks..... I still am a bit unclear on it, but I'd probably have to see it done to fully understand. For instance if the toner is opaqe how would you use a stain on top of it...... or maybe stain is only used on top of non-opaque toners?

I tell everyone that toner is like stain mixed with laqure, with stain once the wood soaks it up the excess just sits there until you wipe it off, the wood will only take so much stain, toner on the other had has the stain(tint) mixed in with the lacquer so when you spray it on it stays on and hardens.

Quote:

Originally Posted by Wagner

Honestly? Too dark, and too inconsistent from too quick to jump to stain.
Stain is a last resort for me, especially on quality species of wood.
I understand you're trying to deal with a damaged surface, but there's better choices to try first.
STAIN: I try to avoid it at all costs and after I've exhausted all other alternatives.
If the damage is chemical in nature, maybe you made the only choice, but if it's just sun (and looks like moisture may have been at work as well) I always try to save the piece with tinted oils.
Once the area of major trauma is close then maybe, just maybe, a judicious thin and quick wipe of species appropriate stain to help blend and tie things together.
BUT, this process takes time and most folks want a quick fix (gratification).
Doesn't work that way with restoration work.
Not trying to be an ass, it's just that I learned this the hard way and have to be reminded of it every time I look at certain "projects" around the house. With deep regret. :(
That's why I approach stain with such prejudice: it cannot be undone.
Very nice speakers; may I ask what you paid for them?
Enjoy,
Thomas

The problem I was having was the wood wasn't taking the stain, it would stain some what by you would see the walnut areas then areas that looked like maple in between. I did try oil not tinted oil but just an oil and the wood looked hideous like a cheap birch wood. It was like the wood had no color left it in, here is an example of what walnut veneer looks like

http://i25.tinypic.com/msivd4.jpg

Look a few post back to the sanded area and you notice the difference, granted that the veneer about is black walnut and the cabinets appear to be walnut. The top was even worse in color. The only true way to restore these would be to re veneer them and all honesty they aren't worth that much trouble.

I paid a 100$ for them, reason being is the horrible condition of the cabinets and I wasn't sure if the drivers would blow apart once sound hit them due to the heat. The original asking price was 200$ but once we got them down the damage was worse then suspect so price went down.
08-20-2009, 08:38 PM
Wagner

Quote:

Originally Posted by Cooljjay

I tell everyone that toner is like stain mixed with laqure, with stain once the wood soaks it up the excess just sits there until you wipe it off, the wood will only take so much stain, toner on the other had has the stain(tint) mixed in with the lacquer so when you spray it on it stays on and hardens.

The problem I was having was the wood wasn't taking the stain, it would stain some what by you would see the walnut areas then areas that looked like maple in between. I did try oil not tinted oil but just an oil and the wood looked hideous like a cheap birch wood. It was like the wood had no color left it in, here is an example of what walnut veneer looks like

http://i25.tinypic.com/msivd4.jpg

Look a few post back to the sanded area and you notice the difference, granted that the veneer about is black walnut and the cabinets appear to be walnut. The top was even worse in color. The only true way to restore these would be to re veneer them and all honesty they aren't worth that much trouble.

I paid a 100$ for them, reason being is the horrible condition of the cabinets and I wasn't sure if the drivers would blow apart once sound hit them due to the heat. The original asking price was 200$ but once we got them down the damage was worse then suspect so price went down.

I wasn't just slamming your choices for kicks. It's just the time frame from when you said you got them to the photos of the finished product was a bit quicker than I would have given it.
Then again, I am quite the master of lost causes. ;)
It's hard for me to give up on challenging cosmetic jobs; I'm addicted to restoration rather than replacement whenever possible.
To me, stain's not much better than paint.
I've managed to rescue a few wood pieces that looked as bad, or worse, than your photos.
Enjoy!
Thomas
08-20-2009, 10:10 PM
Cooljjay

Quote:

Originally Posted by Wagner

I wasn't just slamming your choices for kicks. It's just the time frame from when you said you got them to the photos of the finished product was a bit quicker than I would have given it.
Then again, I am quite the master of lost causes. ;)
It's hard for me to give up on challenging cosmetic jobs; I'm addicted to restoration rather than replacement whenever possible.
To me, stain's not much better than paint.
I've managed to rescue a few wood pieces that looked as bad, or worse, than your photos.
Enjoy!
Thomas

If I don't jump into a project I will never get it done, I have tons of radio's around here that need refinishing but I just don't have the time. Trust me I thought through all my choices to be honest if I were to jump into anything I would have just parted them out, most of the time when people come across things in this sort of condition, they part them out and the cabs hit the trash. What I have done is completely reversible, when the time comes something bigger and better comes along the new owners can simply wipe the old finish off, its not like spray paint that is permanent. But looking at new electronics black is the new wood grain. Another problem that is faced with these cabinets is one is completely bleached while the other still retains some of its color, meaning one cabinet won't match the other, yes I could spend the next 6 months refinishing them but my point goes back to they simply aren't worth the effort. Not arguing with you just pointing out my side. Where are you at in California?
08-20-2009, 10:45 PM
Wagner

Quote:

Originally Posted by Cooljjay

If I don't jump into a project I will never get it done, I have tons of radio's around here that need refinishing but I just don't have the time. Trust me I thought through all my choices to be honest if I were to jump into anything I would have just parted them out, most of the time when people come across things in this sort of condition, they part them out and the cabs hit the trash. What I have done is completely reversible, when the time comes something bigger and better comes along the new owners can simply wipe the old finish off, its not like spray paint that is permanent. But looking at new electronics black is the new wood grain. Another problem that is faced with these cabinets is one is completely bleached while the other still retains some of its color, meaning one cabinet won't match the other, yes I could spend the next 6 months refinishing them but my point goes back to they simply aren't worth the effort. Not arguing with you just pointing out my side. Where are you at in California?

Right down the road from you; Clayton. Just noticed your location after you asked. Wife works in Fairfield.
Thomas
08-20-2009, 10:50 PM
Wagner

Quote:

Originally Posted by Cooljjay

If I don't jump into a project I will never get it done, I have tons of radio's around here that need refinishing but I just don't have the time. Trust me I thought through all my choices to be honest if I were to jump into anything I would have just parted them out, most of the time when people come across things in this sort of condition, they part them out and the cabs hit the trash. What I have done is completely reversible, when the time comes something bigger and better comes along the new owners can simply wipe the old finish off, its not like spray paint that is permanent. But looking at new electronics black is the new wood grain. Another problem that is faced with these cabinets is one is completely bleached while the other still retains some of its color, meaning one cabinet won't match the other, yes I could spend the next 6 months refinishing them but my point goes back to they simply aren't worth the effort. Not arguing with you just pointing out my side. Where are you at in California?

And I wasn't trying to be a prick, just giving my honest opinion. I consider myself reasonably competent at cab rehab and sometime my insistence on preserving all things "original" becomes a bit obsessive. ;)

Thomas
08-21-2009, 08:23 AM
Cooljjay

Quote:

Originally Posted by Wagner

Right down the road from you; Clayton. Just noticed your location after you asked. Wife works in Fairfield.
Thomas

Thats not far at all, shoud stop by and see them in person.

Quote:

Originally Posted by Wagner

And I wasn't trying to be a prick, just giving my honest opinion. I consider myself reasonably competent at cab rehab and sometime my insistence on preserving all things "original" becomes a bit obsessive. ;)

Thomas

Ah, I try to preserve things all original too but after so many radios and stuff that I get with badly dry and flaking finishes you get to that point where you just want a finish on them.
08-21-2009, 08:49 AM
Goodwill_HiFi

Quote:

Originally Posted by Wagner

....... I always try to save the piece with tinted oils.....

Could you explain this further? How is that different than a stain? Traditional stain(*) is pigment, oil, and thinner....... are you mixing colorant with straight linseed oil or something similar?

*Yes, I know dye stains, and water based stains exist.
08-26-2009, 05:33 PM
shaansloan

Quote:

Originally Posted by Cooljjay

Just pulled these down from the rafters at an estate sale and nope there wasn't stairs. I was curious on your thoughts about these? I like the sound and they sure do rattle the walls. Someone mention I should change out the crossover caps..good idea? I am currently figuring out how I want to go about refinishing the cabinets, the whole sun bleach effect doesn't do it for me. If anyone has an original article/catalog/flier on them it would be great to see. Heres some photos

Hey Cooljay....nice score....man for $100 you brought home some Hi-Fi....I have a set of Carmels I got last year....I just love them....I love that warm vintage sound they have....I run them with a tube amp and I like to listen to old Nat King Cole and various Jazz, folk and classical on them....

I have never even had the backs off of mine....I simply had my buddy make me a set of maple legs(one set was missing, mine have legs vs. yours that have stands), slapped some Howards feed and wax on them and its been cool listening ever since....

One day I hope to have them completely restored to original, but I am gonna have a pro do it, I am just not that good at restoring veneer and mine needs a bit of work....I have not done anything with the crossovers or drivers, they run like a champ and are very satisfying to listen to....and very efficient I might add....they are 16 ohm...

I say you have a set of grand old jewels there....worth any effort you put into them.....they have a very unique character of sound that I think is just fabulous! Hats off on a great find! :thmbsup: Shaan