Question on how to mount compression driver in JBL Box

Quote:

---

Would anyone know the center to center distance between the midrange and the tweeter in the 3-way version of this speaker.

---

Can measure this evening if no one else has the answer.

Quote:

---

Originally Posted by gwho

gcarlberg,

Thanks for the picture! How did you cut the saddle. Was that just a jigsaw cut, router, or some other way to make that semicircle.

Regards,
Gary

---

Hey Gary,

I got the outside dimension from the cut sheet in the JBL Library.

Made a rough cut with a jig saw, glued and screw the two pieces together and smoothed it out with a drum sander mounted in a drill press.

George

Looks like 5 1/8" center to center. To get closer I'd have get out the calipers.
I viewed the mounting hole center values on one scale to get the above value probably within ~1/16"

George thanks for the tip on making the saddle.

Grumpy thanks for the center to center spacing.

Best Regards,
gwho

Quote:

---

Originally Posted by gwho

One final question. I would like to add a tweeter. I would like them in-line with the woofer and midrange. Would anyone know the center to center distance between the midrange and the tweeter in the 3-way version of this speaker. I have a pair of Selenium ST200 tweeters (looks like a JBL bullet tweeter but is smaller) but would like to know how significant using a 2405 of 2402 would be with this design. I also have a pair of 2402 bullet tweeters but both need new diaphragms (and I found the price for JBL diaphragms quite high).

Regards,
gwho

---

Hi gwho,

As it is known 2405 has much wider horizontal dispersion then 2402.

regards
ivica

Ivica,

I looked up the sheet and there is a significant difference. 140 degrees vs 40. I assume that the lens on the midrange is supposed to increase the dispersion greater to better match the 2405. I will try to find a pair of 2405 to use in my boxes.

Thanks
gwho

Late but here they are.

Attachment 76286Attachment 76287Attachment 76288

Thanks for the pictures 1audiohack. I guess my pegs are different. You can see the white colored pegs for the speaker cover on the picture of the open hole. I want to thank everyone for the help. I am posting a couple pictures to show what they look like (although I am not finished). I am using parts that I have on hand for the project (the woofer is a AE TD15H). I cut holes and picked up a pair of 2405H for the tweeters. I was able to put in a brace to support the 2441 driver. Attachment 76337Attachment 76338Attachment 76339

One odd thing about the boxes that I picked up is that the previous owner took a jig saw to the woofer opening and opened the diameter almost to the screw holes. This is why I had to go with the external mounts. Luckily the TD15h has a slightly larger diameter than a JBL 2235.

Regards
gwho