Hybrid crossover 4344MKII for LF & MF and Giskard 3155 no CC
Hi guys,
After much tinkering I decided to use the LF and HF sections of the 4344MKII network and the HF and UHF sections taken from Mr. Giskard 3155 but I decided to take out the battery. This means no CC crossover and no bi-amp. I used instead Mundorf Evo Oil capacitors bypassed with Vishay 0.01 microF and high quality mundorf coils and resistors. I will upload a picture of it soon.
1 Attachment(s)
picture hybrid crossover using 2123h
here is the picture of the crossover
1 Attachment(s)
JBL 4346 DYI with external Hybrid crossovers for 2123
Behold my babies! The l-pads are big Visatons. The crossovers are encased in big amplifier boxes. You can check my previous post for the components in the crossover. I used Jentzen JAD cables 2.5 mm OFC. The binding posts were ordered from china. They say its copper but in fact is brass. The cables were soldered with Jentzen silver solder. the drivers are:
LF - JBL 2235 - Actually a 2235 cone on a E 140 chassis
MF - JBL 2123
HF - JBL 2425 J with 2307 horn
UHF - Beyma 21CP/F
Any thoughts?