is any difference between d2430k and d2430h?

Printable View

04-12-2019, 06:11 AM
citiscene

is any difference between d2430k and d2430h?

I have searched the web but can’t find a difference between either driver other than impedance and price? Are they the same just wired series or parallel?
04-26-2019, 07:57 AM
citiscene

Is there a possibility no one knows? Or did ask a question to detailed to answer in view of Samsung jbl?
04-27-2019, 02:26 PM
baldrick

I’m 99% sure they are the same
04-29-2019, 01:23 PM
tjm001

Quote:

Originally Posted by citiscene

I have searched the web but can’t find a difference between either driver other than impedance and price? Are they the same just wired series or parallel?

You might get a better answer in the Technical Help forum.
04-30-2019, 01:40 PM
citiscene

is any difference between d2430k and d2430h?

besides price and ohms is there any other difference ? i see one is wired in series and the other parallel thanks joey
04-30-2019, 01:41 PM
citiscene

Quote:

Originally Posted by tjm001

You might get a better answer in the Technical Help forum.

i figures they might be the same i will post in the technical forum thanks again joey
05-01-2019, 07:52 AM
Mr. Widget

I have zero experience with these drivers, but it appears the K version is used in the M2 and the H version is used in the PA systems. It is possible that there is the previously mentioned wiring change, but possibly the drivers intended for the M2 systems must pass additional QC and meet higher tolerances.

Widget
05-01-2019, 01:24 PM
citiscene

Quote:

Originally Posted by Mr. Widget

I have zero experience with these drivers, but it appears the K version is used in the M2 and the H version is used in the PA systems. It is possible that there is the previously mentioned wiring change, but possibly the drivers intended for the M2 systems must pass additional QC and meet higher tolerances.

Widget

widget thanks , i was able to find out there are 3 part numbers , one for m2( a regular k with additional quality control) , k and h with the last two are pa all 3 versions are 32 / 8 ohm respectively. i cant find a difference between the 2 pa versions other than ohms all 3 versions are 2 x 16 ohm coils
i just ordered a few h to see how they work vs a 2453h-sl driver on the same waveguide.
joey
07-07-2019, 02:57 AM
Jakob

Hi Joey,
Have you had the time to try them out yet?
Im thinking of using one in a center channel build. The -H is about half the price of the -K at speaker exchange. Weird if its the same driver only with other wiring of the diaphragms...
07-08-2019, 07:32 AM
johnlcnm

Quote:

Originally Posted by Jakob

Hi Joey,
Have you had the time to try them out yet?
Im thinking of using one in a center channel build. The -H is about half the price of the -K at speaker exchange. Weird if its the same driver only with other wiring of the diaphragms...

And the two 16 Ohms are externally hooked up on the K's. Don't know about the H's. I have an old pair of K's sitting around. External spade lugs on both. Marked Front and Back driver, plus and minus. The ones I have were hooked up in series.