-
Ivica, he said they're far enough apart, that coupling is not going to happen. Anything farther than 2", and the magnetic fields have fallen off to such a small level (it's a function of the SQUARE of the distance- twice as far, one fourth the magnetic strength- so a small increase in distance makes a big difference in less magnetic field strength) that they won't have a measurable effect, this is what he told me, thanks for the input ivica
-
HI, also in my opinion Coils are Far enough to prevent mutual coupling, so don't worry.
the "90°" rotation rules is used when the coils are really close each other (less than 1-1,5cm).
In general If I can, I use always 90°rules, Just as a safety excess.
ciao
-
yea....its done, ill keep it that way..
i wonder if these would look ok for the Lpads, i cant find the ones with the dot and the line in the middle or the originals
https://www.amazon.com/gp/product/B0...A1THAZDOWP300U
-
3 Attachment(s)
i still have to make the mounting plate for the Lpads and the thin plate for the foilcals....
ill do that monday...
Attachment 73761Attachment 73762Attachment 73763
-
3 Attachment(s)
-
Bottom of the box? and you put on top few more layer for preventing vibration, use some silicon between and below caps.
I decided for external mount, but I also don't use variable L-pad.
-
1 Attachment(s)
so i got a olympic one brand, vivid blue color from lowes.. i kinda didnt like the blue mix from that one thread (info thread)..Attachment 73811
-
5 Attachment(s)
so i started drinking, got drunk and got bored...i stained the plywood with minwax special walnut..
Attachment 74015
Attachment 74016
Attachment 74017
Attachment 74018
Attachment 74019
i put about 2 coats..then i ran out...
-
4 Attachment(s)
i kept drinking and started painting the front baffle with vivid blue from lowes
2 coats...
Attachment 74020
Attachment 74021
Attachment 74022
Attachment 74023
it looks a little bright when wet...its a little flat when it dries...
and the sun is shining directly to it..
-
3 Attachment(s)
i kept drinking until it dried...
and there i was!!!
i still have to paint the inside lip blue....and cover the screws with a wood filler...
for now...
i will veneer it soon!!!!!! just waiting for the right time...and still watching youtube on how to do it...
Attachment 74025
Attachment 74024
Attachment 74026
-
will work on the ports and insulation this weekend..:bouncy::bouncy:
-
Are you sure that you'll be able to glue the veener on the treated (minwax?) playwood? :confused: check that prior to start...
-
yah... its a stain...its not like a coat of paint...
-
Any movement in the build?
-
yes!!!!!!!!!!!!! been busy my bad...life...kids...work...stuff