Finally got a pair of 4301 (so cute!). What reasonably priced amp would be good for driving these for CD playing in my office?
I was thinking of a 30w solid state amp I build from a kit.
Ideas?
Printable View
Finally got a pair of 4301 (so cute!). What reasonably priced amp would be good for driving these for CD playing in my office?
I was thinking of a 30w solid state amp I build from a kit.
Ideas?
Sounds good to me. I use a pair or 4208 with Urei 6211 amps. The amps are 40 watts and they are more than adequate and sound good as well.
Rob:)
http://www.jblproservice.com/pdf/Vin...-6210~6211.pdf
http://www.lansingheritage.org/html/.../1992-4200.htm
Don, in the shop (I need to post some pictures on that part of the forum...) I use an old Pioneer SX-9100 integrated amp on my 4301B's - I think the amp is 65w per channel. It does really, well.
At the office, where after oodles of years I finally tagged into a room with a door :) , I've been running a pair of the 4301B's with an Onkyo 8190 (85w) integrated amp, but don't need all it's features, so I'm switching over to the Yamaha AX-497 (also 85w).
These are great cabinets with good sensitivity, and great response. The bass, in particular, will surprise you... ;)
I currently have a JBL Creature and the guy in the next office says the bass is too much. I figure when he sees the 4301 and, perhaps a small tube amp with some kind of outboard EQ, he will have a coronary. :)
Don't loose that Onkyo to fast... you may discover that it sounded better. :DQuote:
Originally Posted by boputnam
Widget
Yea, but I think I went through that. They do sound different - very. Totally different sound, with the Yamaha having a (relatively) modestly emphasized high end. It is more clear. The bass response seems "tighter". Channel separation seems better, although this could be an artifact of the increased definition in the high-end.Quote:
Originally Posted by Mr. Widget
The Onkyo is circa 1980. It has all sorts of functionality I don't use - two external tape loops, switchable phono preamps, etc. My application is for simplest consumer use; no TV interface.
You certainly run into more consumer gear than I do. So, you're experience is the Yamaha is not preferred...? :hmm:
How about a nice little 6215 or a Crown D-75?Quote:
Originally Posted by Donald
Crown D-45 OK, too?
I can get around "stupid loud" with my 75 on ADS L810's before it clips. This is in my family room basement.
I don't think I've seen a D45. Read about it, yes.
I've noted it before but is seems appropriate again here: Prices for the Crown D-75/A are absurdly high on Ebay. Seldom do they go for less than $170 and those usually aren't very nice. They often fetch $300 or more. Others here suggest it's the price you pay for one-rack-unit-size convenience. If space is not your issue, you can find the D-150A-II or PS-200 for as little as $100. Sometimes even a PS-400 for cheap. I'm listening to my L20Ts hooked to a PS-400 I paid just over $100 for on Ebay; clean and quiet. I'd buy ten more at that price before I'd pay $300 for a D-75. Nice amp but, unless you're carrying it to work everyday, go for its larger brothers. You can never have too much power.
My second system 4301B speakers are powered by a Yamaha mx-2000 130X2 amplifier and they sound sweet. Most of the time the amp is on 1/4 and never gets much over 1/3 volume with not a hint of distortion from the 4301B. Local JBL tech said the pro speakers could easly handle 3x their power rateing.
I have two of the little Carver TFM-6CB amps. They are a 1U rack design and they have adustable input gain (so you can plug them directly into a signal souce and not need a preamp). I've had one for 15 years and the other for 5 - no issues whatsoever and they sound great. They are 65w/channel and the "B" model is bridegable. Can't beat them for $100 on ebay....
jblnut
If you can locate one of these old SONY Pulse Modulation power supply amps you'll have more than your fair share of incredibly distortion free amplification - and they won't crush your shelf either!