Thanks for all the replies!!:applaud:
I spent Saturday measuring the room and taking pics. (I will be resizing the pics this evening and posting the info).
As far as mono it is the signal I am sending from the console. The only amp that is bridged is the sub amp because we are only using 1 2242 at this point. So we use the amps in a ch1 ch2 format. I did not get a pic of the amp rack but will get one on Wednesday when I am there working on the system. As far as the sub cabs go, I will be making them so I can put rigging points where needed.
We will disconnect one of the centers and also run 2 pair of 10awg to each cabinet so I can do any wiring changes from the ground not in the air. We have to get the one man lift out every time we want to do work on them. We are hoping to get a catwalk put in when they start construction this time:bouncy:.
We have also found out that the driverack has the SRX version of the speaker tunings and used that Sunday and made little bit better MF!!:)
I took 40 pics of the entire room,stage. So I will be sifting through them today.
I will also be able to show everyone possible sub locations. This will help to find the pros and cons to the situation.
Thanks again for all of your input and knowledge!!:D