Hi all I have been using both single and dual Deqx systems for several years now. I recently upgraded to the HD3 series including the transformer balanced output boards. I have learned several things along the way and wanted to share them with you. The following opinion(s) are mine and may not...
My speakers are about 10 years old. Here's the crossover network http://manuals.harman.com/JBL/HOM/Technical%20Sheet/Ti10k%20ts.pdf and let's assume the following capacitors 33uF, 39uF, 120uF, 47uF, 100uF and 120uF, are electrolytic (I'm not sure if they actually are, so if anyone knows, I'd be...
Hi guys, Maybe you guys can help me with bi-amping my front JBL 4675's & 4670. Pre/pro=Denon 2807 HF amp= L/C/R channels of an Outlaw 7700 LF amp=Monster MPA-3250 Signal from Denon is unbalanced. I've tried several different prosound x-overs including a behringer dcx2496 digital, an...
Hey Everyone... ! From the photo... these are L100T or L100T3 crossovers? I cannot tell, not having much experience.... Thanks Guys! Mike
Hello folks! Sitting here and planning to change some of my audio gear to more flexible parts, if its a benefit, I dont know. What I plan to do is to get rid of my Ashly 4-way stereo XR4001 analog x-over and then buy two new Behringer DCX2496 digital x-overs, but I dont know how they sound....
Can a Ipod be hooked up using digital straight into the XLR inputs of behringer crossover ? ULTRADRIVE PRO DCX2496 Ultra High-Precision Digital 24-Bit/96 kHz Loudspeaker Management System 3 analog inputs (one suitable as digital stereo AES/EBU input) and 6...
Hi All; I know a few of us use the 260 and I wish to experiment with the phase compensation portion of it however I can not get it to make any difference. Here's what it says on page 38 of the user manual for the 260 in section 4.12 "The output section 480, 481 and 482 DriveRack units...
hello everyone.new to the forum.just joined .and its great.just landed a pair of L100ts for cheap.after much reading here, seems as most like to update to the t3 style crossover.anyone have a how to or a list of parts to replace with part numbers? I all ready own a pair of L100t3 since day one and...
I read manual and there was no mention on how to turn on and off? What am I missing? Tks, SB
Hi all, I've been happily running a 3 way system for a while JBL 2405 Tad 4002 (with Radian drivers, the originals were too expensive at the time) Tad 1601b Crossing over at 800hz and 8khz.
Hello Everyone! Yes, I am a newbie so I apologize in advance for any mistakes I have already made so far. Can anyone please explain to me what the difference between a 1500Hz passive crossover and a 3500hz passive crossover would be? I am looking for the right crossover to finish my...
Is anybody using BSS Omni drives, either FDS-334T or FDS-336T? I would be interested in your opinions. Does anybody have any direct experience with comparisons with the DBX Drive Racks Vs the BSS Omin drives...... many thanks, OR is one better off going down the DEQX road.
I've been playing with my Soveriegns for some time now and absolutely love them... they are original in every way, and for a while I had them bi-amped using a fairly inexpensive Pyramid DJ type crossover. but that unit has failed, and its time to upgrade. I do a fair amount of critical...
Hi, The filter for my project http://audioheritage.org/vbulletin/showpost.php?p=276782&postcount=85 , the model BBE DS48. This model has 4 inputs and 8 outputs. http://www.bbesound.com/products/speaker-management/ds48.htm Some pictures Stéphane...
just picked up a pair of c34 w/030 but one of the 130's is dead.... everything else works..cabs are rough cosmetically but they were $50pair will a D140(8 ohm) damage the crossover?...I can't image these in a living room....thanks
Who can provide more the revel Studio2 crossovers informations. Because I want to copy revel Studio2 crossovers. I plan to MCAP mpk capacitor replace the original electrolytic capacitors and Copper Foil Inductance replace the Original inductance.who can give me the revel Studio2 crossovers Circuit?
Most of the JBL speakers have Elytone capacitors.I was wondering what type of capacitor would be the best upgrade. Should i stick with Elytrolytics? Or should I go with Polypropylene? Any best option for JBL? Thanks.
Here are some pictures of my DX-1. I'm desperately looking for some new new gold plated dual horizontal rca circuit board mount connectors. Can anyone help me locate a source for these? please help as I have a pristeen set of Black laquer XPL-200's that I have bi-amped with a couple of yamaha...
I have a pair of N500D crossovers for my A7-500's. The Knob on the back of the crossover does not move freely like other vintage Altec crossovers I have. What I mean is when you turn the knob it clicks into the next possition. Is this normal for that x-over?
Hi all I have looked at this forum for ages and have had a number of pairs of vintage Altecs and JBLs. Sorry to post this kind of off topic but- I am a little lost as I have a great pair of speakers, all good condition but they are missing there outboard EQ. The speakers are EV Interface B and...
My power amp recently fried, so I just got a new Proceed Amp-2 from e-bay, this has the choice of XLR and RCA connections. Has anyone compared connecting a 5235 to their bass amps with both type of connectors? If I remember well other discussions here, the 5235 is not truly balanced, so I was...
Anyone have a link to a N-800F schematic for 16-ohm valencia (846A's)? Thanks
I would like to go active with my 2235's added onto my current setup which is 3-way passive. I'm using 2205's on the bottom, 2420's on PT waveguides, (6 1/2 x 12) and 2405's The crossovers are custom made crossing at 800 and 7k. I just got a line on a 5235 with 250 hz cards. would this be a good...
i have a chance to pick up a WestLake Studio Version of HR-7, however it come without a crossover network i need to look at some good quality / audiophile grade 4 ways active crossover... i never use a active crossover..in the past.. wish to have some advice... thx..
On advice of my FOH engineer, of Technical Support Consultants, Albuquerque, NM, I grabbed two of these for a trail. One in the pro gear, road rack; the other here at home with the 4345's. The XR1001 is a 24dB/octave crossover, with adjustable crossover point. And, as GordonW was posting...
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
