PDA

View Full Version : Preamplifier with 4 channels or more



Jan Daugaard
03-09-2006, 02:04 AM
I'm currently using 2 stereo amplifiers in a 4.0 surround sound system. The sound is fine, but it is a nuisance to adjust the volume seperately on 2 stereo amplifiers.

Any suggestions for a preamplifier with at least 4 channels, solely for the purpose of adjusting the volume?

JuniorJBL
03-09-2006, 12:36 PM
"Y" cables;)

These are cheap and unless you need a true surround processor then you can do it on the cheep. Otherwise you can spend from about $600 on a surround receiver to what ever your wallet can handle

Edwards
03-09-2006, 04:27 PM
Audio Research makes a unit that can accomodate up to 6 channels at one time. This is a current piece, and it is a bit on the expensive side at $6,995 MSRP, especially considering that it is all transistor driven.

Check out the following link...http://www.arcdb.ws/MP1/MP1.html

You may want to look for an older Marantz quad pre-amp.

matsj
03-11-2006, 04:44 AM
Take a look at Copland cva 306.

copland.dk

regards mats