PDA

View Full Version : A7/2245 (x2?)



moldyoldy
01-02-2006, 07:13 PM
Hi, All!

I'm converting a pair of A7s (825) for active 4-way use. I have 515-8GHPs for the sealed-off horns, which will 4th-order XO around 120Hz. I've read most of the threads on adding a 2245 in the bottom, and was headed that way, but now I've got 4-2245s, and was just wondering........

Anyone have comments or suggestions on the possibility of putting 2-2245s in an A7 bottom?

Anybody have a single setup with a "if I had to do it over" story?

Brad

louped garouv
01-03-2006, 01:06 PM
why not double 18" scoops below the A7s?

moldyoldy
01-04-2006, 12:16 AM
I'm considering that, and could flip the A7s and put the High-mid and HF drivers in the unused old reflex area, instead of on top of the A7s, but don't really want the highs that far off the floor, unless the bins were limited to <24" high. I guess I'm mainly wondering if there's a satisfactory way to use 2-2245s in the cab volume recommended for one. (+/- 8 cu. ft.)