2410 an equivalent to 175 DLH ?

[jan_slagman]

Hello,

Can anyone tell me if the horn and lens 2410/2301 are an equivalent to the 175 DLH ?. Can i use these drivers with the LE 14 A and LX 10 X-overs ? I have the intention to copy a Lancer 101.

Jan Slagman

[jbl]

The 2410 is the LE175. The horn I'm not 100% certain of. Others may know.
Ron

[4313B]

I can't remember if it was the 2301 or 2305. I want to say the 2301 was a later version. I think subwoof knows for sure.

***

This is all I could find:

http://audioheritage.org/vbulletin/showthread.php?t=1919

[edgewound]

Hello,

Can anyone tell me if the horn and lens 2410/2301 are an equivalent to the 175 DLH ?. Can i use these drivers with the LE 14 A and LX 10 X-overs ? I have the intention to copy a Lancer 101.

Jan Slagman

2410/2305 is the same as 175DLH....I just checked my 1976 JBL Pro catalog

[subwoof]

The 1290-1217 ( pretty sure that's the number ) was used for BOTH the 1" masher variants. I actually had one of each a few years ago.

That horn was often mated with the 175 driver but there WAS a variant of the black magnet alnico types that had phenolic diaphrams.

The 2305 had a removable mounting flange and was slightly longer than the 2301 whose flange was integral.

LE175 = 2410
LE100S = 2460 ( there might of been a 175HP but I'm not sure )

LE85 = 2420
LE85HP = 2470*

375 = 2440
375HP = 2480

*Note the 2461/2470/2482 had an aluminum voicecoil while the older ones were copper

sub

ps I have a set of LE10A and PR10 with NOS jbl cone kits installed....need any

:cheers:

[jan_slagman]

Tanks all of you for helping me out ! I really appreciate your input !

Jan Slagman
The Netherlands.

[paragon]

I would use this above 1500 Hz only.

[Windsor2k1]

Short ?---- What's the difference??... I have a set of 2421a...


Will