View Full Version : 375 to 2390
Dwight
09-12-2003, 03:13 PM
Is there supposed to be a gasket,,cork?,,between the 375 driver and the 2390 horn or is it just metal to metal contact? Thanks,
Robh3606
09-12-2003, 07:59 PM
Yes there normally is a gasket. Just go to the hardware store and by some gasket paper and make one. You can also order one from JBL Pro
Dwight
09-12-2003, 08:19 PM
Thank you, that was helpful.
Bruno GINARD
09-13-2003, 12:22 AM
« Gasket paper » :
I don’t understand what kind of gasket is made of paper and is usable for this scope of application.:confused:
Can you give me an example of use .
Regards
Robh3606
09-13-2003, 06:23 AM
Hear you go. All you need is a soft buffer material and an airtight seal. You can use paper cork or what have you. The gaskets on my adapters are paper from JBL.
http://www.ramjointings.co.uk/corkpap.htm
Just do a search on gasket paper. You can get sheets of it in various thickness depending on the application. An automotive supply store will have it too.
Rob:)
Alex Lancaster
09-13-2003, 07:09 AM
And if You get real lazy, like me, smear a thin coat of caulking compound out of a tube: rubber, acrylic or anything but silicone as the latter gives out acetic acid (vinegar), which corrodes, make sure it does not stick out at the inside of the joint.
Alex.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.