Everest crossover with 2402 and 2440 on a 2380A Horn

[MatthiasA]

Hello!

the parts for the everest crossover are not too expensive

iam searching for a while a crossover for my 2402 8 ohms High Driver
and for my 2440 mounted on a 2380A 16 ohms Horn Midrange Driver

orginal the 2405 16 ohm (high) and the 2425H 8 ohm (mid ) are used in the
everest crossover schematics

what parts must i change due to the differently impedance of the drivers ?

the crossover frequence of 850 hz / 7500 is great ! this is what i need!

2 E-140 woofers are in the subsection

greetings Matthias

[Zilch]

Again, all of the 240x drivers are the same impedance, whether they say 8 or 16 Ohms.

Your 2440, you'll put a 16-Ohm resistor in parallel with it and lose 3 dB of output, or change the diaphragm to 8-Ohm version.

Gettin' that tapped inductor is not a problem?

[Guido]

Matthias,

the 2440 and 2425 are completely different animals!

They ae NOT interchangeable. The difference in impedance is the smaller problem. The difference in response is the bigger one.
To implement the 2440 in the everest design is pro work!!

[MatthiasA]

have anybody schematics of an x over for the 2440 ?
850 to 7500 hz ? it is a 16 ohm driver


Greetings Matthias