View Full Version : N333
delahais
08-10-2005, 07:43 AM
Hi,
what modification can i do on n333 for a 2425h driver ?:idea:
thanks.
Mr. Widget
08-10-2005, 04:13 PM
Here is the schematic for the 3133 which I believe is identical to the N333.
http://www.jblproservice.com/pdf/Network%20Schematics/3133%20Network.pdf
Since it uses a tapped autoformer changing it from the 16 ohm LE85/2420 to the 8 ohm 2425H isn't entirely straight forward. I believe that Giskard posted an equivalent schematic without autoformers, but that will take a bit of advanced searching.
The easy fix... which isn't the best solution but should work is to put an 8 ohm 20 watt resistor in series with your driver. You will loose 3dB of sensitivity... but I expect that isn't a problem.
Widget
Alex Lancaster
08-10-2005, 04:45 PM
:) The not so easy but correct fix is to get D16R2425 diaphragms.
ounesh
08-19-2005, 06:58 AM
Hi Delahais
Have you got my private message about N333 filter in last days ??
Ounesh
John W
08-19-2005, 07:23 AM
Here is the link to the equivalent N333 without the autoformer.
http://audioheritage.org/vbulletin/showthread.php?t=166&page=1&pp=15&highlight=l300+charge
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.