PDA

View Full Version : 604 Enclosure for DIY?



edschum
07-23-2005, 02:11 PM
I am trying to find the 'best' corner enclosure design for 604-C's or D's. I have searched the literature on this site and have come up with the 620 enclosure design, only. Anybody--is this all there is? Are there variations that have to be made for differences in 604 model #'s?

Ian Mackenzie
07-24-2005, 01:05 AM
Apparently,

Not too far back there was an excellent thread which mentions the evolution of this driver, try the search function and also the Altec users homepage.

From memory the magnet had some changes and this effected performance and overall response. I prevously owned an excellent book by Don Davis and Alex Bradminof (?), it was full of enlcosure plans for the Aletc 604 series, VOT and others, sadly the loaner was never returned.

Ian

spkrman57
07-24-2005, 04:59 AM
This is a fellow I know on AK forum. Bill has done some research on this!

http://www.wardsweb.org/Billfort/

Hope this helps!

Ron

Robh3606
07-24-2005, 06:51 AM
Here's the plans for a 606 cabinet. Hey Ian quess where I got it?? It's also in the 1960 Altec Plans on the site.

http://www.lansingheritage.org/html/altec/plans/1960s-plans.htm

Rob:)

Lawrence HF
07-24-2005, 11:17 AM
Hello Edschum, do not know where you are, but I have a 606 cab w/604 speaker in NYC if you would like to see and or hear it.

Zilch
07-24-2005, 02:26 PM
Hey Ian quess where I got it?? Give Ian his book back, now.... :scold:

[Sheesh. KIDS....] :p