Akira
07-19-2005, 09:12 AM
i know, i know...your going to blast me about crossing over a 2405 slot at 6K with a 6db/octave passive cross over, but...
if i wanted to attenuate the signal 6db in level and increase the slope at the 6K point, what elctronics would i need. i don't want to change anything in the original cross over, so i hope to wire something in series after the dividing network.
if i wanted to attenuate the signal 6db in level and increase the slope at the 6K point, what elctronics would i need. i don't want to change anything in the original cross over, so i hope to wire something in series after the dividing network.