PDA

View Full Version : Dayton Capacitor Questions



cary
07-23-2003, 08:14 AM
Has anyone used the Dayton polypropylene caps from Parts Express? What were the results? I will be recapping a pair of L19's.

boputnam
07-25-2003, 11:25 AM
"If I were you I would just bypass your current stock JBL metallized mylars and NPE's with the 0.01 uF AudioCaps and give that a listen first."

I've got a few of those 0.01 uF AudioCaps on the bench now ;) maybe I'll do likewise while reconing the 116H's. Is that the 3101A schematic?

"I always liked the little L19/4301."

Me, too - anxious to get these (re)done.

boputnam
07-25-2003, 01:19 PM
"I'm anxious to see what you think of the AudioCaps."

Me, too. This 4301 wasn't intended to be "next", but the entire project sequence is awfully upset anyway, so I might as well go here, first - I'll get more AudioCaps for the original plan.

Simply two to bypass (10358 and 57529), right? And what's the max watts / temp you'd suggest for the iron? :confused:

I plan to A/B the pair, on the bench...