View Full Version : Help!

Mr. Widget
02-07-2005, 01:33 AM
We have been working on various aspects of Project May for a bit over a year now. If you have missed it, click on the JBL logo at the top of the page for background information. We have been given world class drivers and have spent a fair amount of time and energy trying to get the most out of them. Now that we are at a point where the fundamentals are pretty much nailed down, we are ready to tackle the aesthetic design. Here is an image of their current state. It is quite obvious that we need design help! If you would like to help participate on the Industrial Design including engineering to aid the fabrication or contribute with the actual fabrication for Project May, please check out this thread in the Private Forums section of the Lansing Heritage Discussion Forums.





Titanium Dome
02-07-2005, 08:32 AM
I've tried several times to access the information, but here's what I get:

Titanium Dome, you do not have permission to access this page.

So, maybe something's goofed up, or I'm just not permitted to participate. :scold:

Mr. Widget
02-07-2005, 09:58 AM
You will need to ask Don to be given access to the Project Forums. The access is limited to those participating in the project, but is available to all Forum members who would like to participate.


02-07-2005, 10:47 AM
Hi again Widget,

Hi Widget,

transfered this to the thread here.....

........... Hope that we can find a decision soon. I guess you should contact Don with a PM to ask him about his preferences. A year ago I remember that he made some about surfaces and maximum size and ....
The size is fixed through the acoustical requirement as we know, but there are some variations to think about.

It's a pleasure for me to do the construction job by Autocad and mail it wherever needed. I can also do printouts on a 36" x 60" format for the whole system.
Maybe that the participating members like to get one when the job is finished.

Don't hesitate to contact me for some work.


Mr. Widget
02-07-2005, 10:52 AM
Hi HP,

This should be in the Private Threads...