Helping tool when re-coning !

[Flodstroem]

Hi you re-coners, a tip?

It must be a good help when gluing cones, domes etc.... to use a rotary table which make you to not to have to rotate the basket/speaker by your selv, but the table do the job and you only hold the gluingtube to get a profesional gluing result ?

If you would like to build a rotary table to be used when re-coning loudspeakers maybe this could be an idea: ebay, item # 3869489227 (recently I bought one, and seller has more of them upp on auqtion)

Best Regards

[John]

That is exactly the way Chris at G.P.A. performs the task,I had the full back room tour and saw the master at work. Next time i stop in there i will snap some pics and post.:bouncy:

[GordonW]

Yep, it's very useful.

If you're really cheap (like me :D ), you can just go to Home Depot, Lowes, etc... and buy a 6" diameter "lazy susan". Just bolt it onto the bottom of like a 12" or so, round or square piece of MDF... instant woofer stand!

Regards,
Gordon.

[Flodstroem]

John
That is exactly the way Chris at G.P.A. performs the task,I had the full back room tour and saw the master at work. Next time i stop in there i will snap some pics and post.

Yes, it would be very interesting if you could get the opportunity to snap some pics of the machinery. It would help a lot when constructing my own rotary "gluing-table" :hyp:

Thank´s