PDA

View Full Version : altec 400B diacone



madotec
01-15-2005, 01:04 PM
Good evening,

I recently acquired a nice pair of Altec 400B Diacone speakers and would like o know if someone on the forum gets Altec enclosure drawings for such speakers or where i can fond out such information.
Thanks for your help ;) .

Best regards,

Dominique Mafrand, Paris, France

CONVERGENCE
01-22-2005, 05:31 PM
HI

I DON'T SEEM TO FIND THIS MODEL. WHAT YEAR WAS IS PRODUCED.

YOU CAN LOOK AT THIS WEB ADDRESS .

http://alteclansingunofficial.nlenet.net/proloudspeakers/index.html

IS IT A 400 SERIES 15 OR 12 " . WHAT
DOES DIACONE MEAN????


REGARDS

BERTRAND P.S YOU CAN ALSO LOOK AT THESE http://www.iconicspkrs.com/index.html

CONVERGENCE
01-22-2005, 05:47 PM
SORRY. THESE ARE MUSICAL INSTRUMENT SPEAKERS. LOOK IN THE ALTEC LIBRAY.http://www.lansingheritage.org/html/altec/catalogs/altec-cat.htm

YOU SHOULD FIND WHAT YOUR LOOKING FOR. THERES A SECTION FOR PLANS
ALSO.

WITH KINDNESS AND BEST REGARDS

BERTRAND

MONTREAL

CONVERGENCE
01-22-2005, 06:15 PM
HI
THEE IS A PAIR ON E BAYhttp://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&category=50597&item=5745848180&rd=1&ssPageName=WDVW

THESE ARE 8" SPEAKERS . USE TO MAKE CABINETS FOR UNIVERSITY STUDENTS WITH ALTEC PANCAKE PEAKERS. GREAT FOR NEERFIELD.

Don McRitchie
01-22-2005, 06:29 PM
The 400B is not a musical instrument speaker. It was an early full range driver (introduced in late 1940's) that was 8" in diameter and used an aluminum center dome in place of a dustcap. JBL developed their D208 to be a direct competitor. There is a limited amount of information on the following page along with compatible Altec enclosures from that era:

http://www.lansingheritage.org/images/altec/catalogs/1949/page5.jpg

P.S. To Bertrand: Please do not post in all caps. It is considered the internet equivalent of shouting and is difficult to read.