C6Z06
04-20-2020, 01:47 PM
Hi, new forum member and new owner to a pair 4350, they are modified by previous owner (some studio in Denmark i think).
No binding post in the back of the speakers just drilled holes with big cables running thru.
LPAD is disconnected and has no running wires to them.
My plan is to change all those cables cables and connect the LPADS.
If any one has some documentation where all cables go from the crossover i would be very grateful.
No binding post in the back of the speakers just drilled holes with big cables running thru.
LPAD is disconnected and has no running wires to them.
My plan is to change all those cables cables and connect the LPADS.
If any one has some documentation where all cables go from the crossover i would be very grateful.