Jbl Srx-700

[pelly3s]

I just got in some of the SRX-715's in my shop and the horn is great. The 2431 is so much smoother than a 2425. I just have to check the prices on them jbl's pro sales website is down right now so i can't really check.

[TimG]

The horn is $31.50 each, I have 2 on the way. I will post results after I measure them with some suitable drivers.

[Zilch]

Cool, cheap.

How 'bout the DRIVER? :rolleyes:

[ralphs99]

That's interesting 'bout the smoothness. The amplitude response looks very flat on the SRX712M (2431) data sheet all the way up to about 7kHz. Then a slight rise of 3dB, before dying after 10kHz. Even with the plunge in DI after 10kHz, it's still not enough to scrape together enough output in the last octave. A UHF driver seems a necessity with the 2431.
The 2425 still shines in the JBL VHF department; at least for a 2 way compression driver design...
Anyone got some detailed data on the 2431?

[pelly3s]

when i say smoothness it doesn't have that "bite" like the 2425 does around 2.5k. About the price I wanna know what my price is if the horn is that cheap gotta love working at a JBL warrenty center

[johnaec]

Any idea of the difference between the 2431 and 2430, (as used in the DMS1 and EVO)? The 2430 is very reasonably priced.

John

[Zilch]

DMS-1 data sheet says it uses 2450SL-A with "A new ['97] 38 mm (1.5") diameter exit neodymium high frequency compression driver with Coherent Wave™ phasing plug and 100 mm (4") diameter titanium diaphragm delivers low distortion response to beyond 20 kHz.

Is 2430 equivalent?

[johnaec]

DMS-1 data sheet says it uses 2450SL-A with "A new ['97] 38 mm (1.5") diameter exit neodymium high frequency compression driver with Coherent Wave™ phasing plug and 100 mm (4") diameter titanium diaphragm delivers low distortion response to beyond 20 kHz.

Is 2430 equivalent?Ooops - 'my mistake. I was thinking of the 2332 horn with 1.5" throat as used in the DMS-1. Someone here has tested that combo in the past, (2430/2332), and I've often wondered how that would sound in a quasi-4343 setup...

John

[miklos]

Hello,
I am new to this site.
I would like to see a picture of the JBL Coherent Wave™ phasing plug.
Would you please direct me to a place on the Internet where is a picture of it? I searched the net, but no luck.
Thanks, miklos



DMS-1 data sheet says it uses 2450SL-A with "A new ['97] 38 mm (1.5") diameter exit neodymium high frequency compression driver with Coherent Wave™ phasing plug and 100 mm (4") diameter titanium diaphragm delivers low distortion response to beyond 20 kHz.

Is 2430 equivalent?