Alex
01-02-2005, 06:01 AM
Dear all,
I checked the DC resistant of the two LE-85 in my olympus S-7,it appeared one was 11.5 ohm but other was 6.5 ohm, they were original drivers in the olympus and shown they were 16 ohms version.:(
Unfortunately,I received a extra pair 16 ohm LE-85 won from ebay and their DCR measured is 4.7 ohm and 6.1 ohm respectively.:biting: the four drivers' screw red seal were all existed without repaired evidance.
I hope one can tell me if normal 16 ohm LE-85 should shown which value of DCR,I have a pair of 16 ohm 2440 meaured they were 8.2 ohm.
Many thanks for help.
I checked the DC resistant of the two LE-85 in my olympus S-7,it appeared one was 11.5 ohm but other was 6.5 ohm, they were original drivers in the olympus and shown they were 16 ohms version.:(
Unfortunately,I received a extra pair 16 ohm LE-85 won from ebay and their DCR measured is 4.7 ohm and 6.1 ohm respectively.:biting: the four drivers' screw red seal were all existed without repaired evidance.
I hope one can tell me if normal 16 ohm LE-85 should shown which value of DCR,I have a pair of 16 ohm 2440 meaured they were 8.2 ohm.
Many thanks for help.