PDA

View Full Version : Jbl L26 crossover removal (or other jbl stapled crossover).



Philv
01-31-2019, 01:39 AM
Hi

my jbl L26 crossovers have tne crossovers stapled (not screwed) to the inside of the cabinets.

i think there may also be a circle of glue around tne treble tone control to keep the crossover tight against the cabinet around tne control?

Has anyone removed a crossover that has been installed like this?

what is the best way to remove them?
Lever out with a chisel or screwdriver or?

Thanks for any info.

Philv
02-17-2019, 01:23 PM
Any info?

i really want to redo tne crossovers.

just lever them out or?

Ed Kreamer
02-17-2019, 01:40 PM
Yep, Screw driver chisel or putty knife. Carefully. I Believe Troels Gravesen has a fix for the crossover project you have in mind. You might want to check that out.

Have fun
Ed

Philv
02-17-2019, 02:31 PM
Thanks for the reply.

it has to be done as they deserve it.
Luvly condition and i really like the sound.

Not sure about the crosdover upgrade.
i don’t want to change the sound chatacteristics.


Yep, Screw driver chisel or putty knife. Carefully. I Believe Troels Gravesen has a fix for the crossover project you have in mind. You might want to check that out.

Have fun
Ed

Philv
02-23-2019, 01:28 PM
Yep, Screw driver chisel or putty knife. Carefully. I Believe Troels Gravesen has a fix for the crossover project you have in mind. You might want to check that out.

Have fun
Ed

it does seem wuite an expensive fix.
i wonder if anyone has done it who can comnent on tne results.

Philv
03-04-2019, 11:56 AM
Which caps should i use?

what do people tend to use in their jbls? Ie which make?

Philv
03-04-2019, 12:05 PM
Are solen caps fine for use in the gravesen upgraded crossover?